Warranty Information - Lincoln VISTA 1000 Operator's Manual

ADF stays dark after you stop welding:
• The temperature limitations of the ADF have been exceeded. Let
the ADF cool down and try not to over heat it again by viewing the
arc from the side or at a greater distance.
• It may remain dark if you are facing a bright light or the sun. Look
away or pass your hand between the sensor and light source.
ADF is cracked:
• Cease (STOP) using this product if this problem exists. UV/IR pro-
tection may be compromised resulting in burns to the eyes or skin.
Weld Spatter is Damaging the ADF:
• Missing, damaged, broken, cracked or distorted Protective Cover
Lens. Replace inside and outside Clear Cover Lenses as needed.
• Do not use this product if severe spatter damage has
occurred to the Auto-Darkening Filter Cartridge or protec-
tive clear cover lens. Severe eye damage and burns can
result.
------------------------------------------------------------------------------------------------------
WARRANTY INFORMATION: Reference IMWS1 included in Literature
SPATTER DAMAGE IS NOT COVERED BY WARRANTY:
Do not use this product without the correct protective clear cover lenses
installed properly on both sides of the Auto-Darkening Filter cartridge (ADF).
The cover lenses supplied with this helmet are properly sized to work with
this product and substitutions from other suppliers should be avoided.
For Warranty Transactions, contact your local Lincoln Electric distributor.
(Ref IMWSI)
WARNING
11