Advertisement
Set up
The adapter is compatible with the Xbox One first and second generation wireless controllers.
Plug the adapter into a compatible Xbox One controller.
1
Power on the Xbox One controller. It may take the adapter up to 10 seconds to boot up. The LED
2
turns on for 2 seconds to indicate power.
Connect a headset to the adapter in the 3.5 mm jack.
3
Choose how you want the dials to be configured. By default, the adapter is set to Balance mode.
4
Press the EQ button for 2 seconds to switch between Balance and Independent mode.
•
Balance mode
In Balance mode (blue LED) the top dial controls master volume and the bottom dial
balances game and chat.
•
Independent mode
In Independent (green LED) mode the game and chat channels are split; the top
dial controls game volume and the bottom dial controls chat volume.
Choose an EQ setting. Cycle through the EQ modes by tapping the EQ button.
5
Tap the EQ button and hear
one tone
two tones
three tones
Optional
Plug a device into the 3.5 mm jack, if you want to listen music while gaming.
6
00:00:10
EQ mode
Pure EQ maintains high frequencies.
Intensify EQ emphasizes mid-range sounds.
Seismic EQ boosts bass.
4
Advertisement
