Marvin 7860 Instruction Manual

FOR REPAIRS
TEN-YEAR
LIMITED WARRANTY
Do not attempt to service or repair this
heater. If damaged or not functioning
2-YEAR WARRANTY ON HEATING ELEMENTS
properly, return heater to W.B. Marvin. For
safety reasons, servicing is only available at
W.B.Marvin Manufacturing Co., the
the factory. Parts can
manufacturer, warrants to original
not be sent to the customer.
purchasers of their electric heaters that
Marvin heaters shall be free from
When returning the heater to us, pack the
electrical defects for a period of ten (10)
heater in its original carton THEN pack that
years (2 years for heating elements) from
box in a larger shipping box and pad well.
the provable date of purchase. The
applicability of any implied warranties is
Ship to:
limited to the same ten (10) year (2 years
W.B. Marvin Manufacturing Co.
for heating elements) period. Some states
Inspection Department
do not allow limitations on how long an
211 Glenn Avenue
implied warranty lasts, so the above
Urbana, Ohio 43078-0230
limitations may not apply to you. The
manufacturer is not responsible for any
For Warranty Repairs
defect or malfunction caused by abuse or
Include proof of purchase and a note
misuse occurring while the heater is in the
explaining the problem with your heater,
possession of the purchaser including
and a return address.
without limitation uses for purposes not
We'll repair or replace (at our option) your
intended by the manufacturer.
heater and return it. Please allow 2 weeks.
The manufacturer is not responsible for
For Out-of-Warranty Repairs
any defect or malfunction caused by
Return heater along with a note explaining the
repairs attempted by others, damage in
problem with your heater, a phone number
transit, abusive treatment or commercial
where you can be reached during the day, and
application.
a return address.
In the event of the occurrence of a defect
We will inspect your heater & call you with
covered by this warranty, the original
a quote for the cost of repairs.
purchaser shall, at his expense, return the
heater along with proof of purchase to the
W.B. Marvin is concerned about the
manufacturer, attention Inspection
well being of our environment, and
Department. If the defect is covered by
we'd like to point out the following:
this warranty, the manufacturer shall
within sixty (60) days after receipt thereof
1. Many components of our products are
correct the electrical defect without cost to
made from recyclable materials.
the original purchaser. Any questions
And, we will continue to look for new
concerning this warranty shall by directed
materials to help the environment.
to the Inspection Department of the
2. The use of our heaters encourages manufacturer.
conservation by allowing the user to
This warranty gives you specific legal
conserve on central heating.
rights, and you also may have other rights
3. All shipping cartons are recyclable.
which vary from state to state.
W.B. Marvin is constantly looking for new
ways to help the environment. Please don't
The W.B.Marvin
hesitate to send us your suggestions.
Manufacturing Company
8
HEATZONE
WORKSHOP HEATER
With Replaceable Elements
INSTRUCTION MANUAL
WARRANTY INFORMATION
UNDERWRITERS
LABORATORIES
LISTED
Made in the U.S.A.
7860-0701
MODEL 7860 PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to
persons, including the following:
1. Read all instructions before using
this heater.
2. This heater is hot when in use. To avoid
burns, do not let bare skin touch hot surfaces. If
provided, use handles when moving this heater.
Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9m) from the front of the heater and
keep them away from the sides and rear.
3. Extreme caution is necessary when any
heater is used by or near children or invalids and
whenever the heater is left operating and
unattended.
4. Always unplug heater when not in use.
5. Do not operate any heater with a damaged
cord or plug or after the heater malfunctions, has
been dropped or damaged in any manner. Return
heater to W.B. Marvin Manufacturing Co. for
examination, electrical or mechanical adjustment,
or repair. (See the section "For Repairs" on the
back cover)
6. Do not use outdoors.
7. This heater is not intended for use in
bathrooms, laundry areas and similar indoor
locations. Never locate heater where it may fall
into a bathtub or other water container.
8. Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or the like.
Arrange cord away from traffic area and where it
will not be tripped over.
W.B. Marvin Manufacturing Company
211 Glenn Avenue,
Urbana, Ohio 43078-0230
937-653-7131, Fax 937-652-1375
Toll-Free: 1-800-733-1706
www.wbmarvin.com
9. To disconnect heater, turn controls to
off, then remove plug from outlet.
10. Connect to properly grounded
outlet only.
11. Do not insert or allow foreign objects to
enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or
damage the heater.
12. To prevent a possible fire, do not block
air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where
openings may become blocked.
13. A heater has hot and arcing or sparking
parts inside. Do not use it in areas where
gasoline, paint, or flammable liquids are
used or stored.
14. Use this heater only as described in this
manual. Any other use not recommended by
the manufacturer may cause fire, electric
shock, or injury to persons.
15. Avoid the use of an extension cord
because the extension cord may overheat and
cause a risk of fire. However, if you have to
use an extension cord, the cord shall be No.
14 AWG minimum size and rated not less
than 1875 watts.
16. This heater includes a visual alarm to
warn that parts of the heater are getting
excessively hot. If the red overheat light
comes on, immediately turn the heater off
and inspect for any objects on or adjacent to
the heater that may cause high temperatures.
Do not operate the heater with the
overheat light on.
GROUNDED PLUG
For 120 volts. This cord has a 3-prong
plug as shown. An adapter is available
for connecting three-prong
grounding-type plugs to two-slot
receptacles. The green grounding lug
GROUNDING
extending from the adapter must be
PIN
connected to a permanent ground such
as a properly grounded outlet box. GROUNDED
3-PRONG
The adapter should not be used if a three-slot
OUTLET
grounded receptacle is available.
2
OUTLET WITH
ADAPTOR - SHOWN
CONNECTED TO
METAL SCREW OF
OUTLET BOX
COVER.