Table of Contents
Advertisement
Menu
The menu is activated, by pressing the NAV rotary encoder. The top level of the menu
will appear. This is the Status display. The Status display will show general status
information related to the currently selected input, such as the source selected and video
standard where applicable. It will also indicate and connected digital inputs that are locked
(SDI or AES). If a Dolby input is selected and the Dolby decoder is enabled, further Dolby
information will be shown.
To select the next menu item simply rotate the encoder. If you want to enter the currently-
displayed menu item press the encoder for approximately 0.5 seconds. The second level
will then appear and the required item selected by rotating the encoder and then pressing
it. At this point in the menu the value of the current parameter can be adjusted. To go
back one step in the menu press and hold the encoder for longer than 1 second.
Tip: Simultaneously pressing the buttons under the bargraphs 7 and 8 will completely exit
the menu.
The characteristics that can be adjusted in the menu are shown below.
Top
l evel
m enu
p age
The top level of the menu carries the main areas of operation of the BM-AV1-E16SHD
that can be adjusted.
1. Status display – provides general status information for connected digital inputs.
2. Level meters - This section allows access to the bargraph colour break points and
ballistics.
3. Line levels - The line output level control can be selected here (either fixed level or
controlled by the volume control). The line output can also be muted, or slaved to the
main speaker mute control.
4. Analogue levels - The analogue output level control can be selected here (either fixed
level or controlled by the volume control). The analogue output can also be muted, or
slaved to the main speaker mute control.
5. Dolby - Various aspects of the Dolby operation can be accessed here.
Version
2 .1
BM-‐AV1-‐E16SHD
2012
Page
1 1
Advertisement
Table of Contents
