These brief setup instructions will introduce you to the feature set of IGEL one and help you with the quick set up of your clients. You will find more detailed information on the sytems' configuration in the IGEL user instructions for linux thin clients.
Page 3
4 Boot IGEL one The boot procedure will last for only a few seconds and during this time the IGEL startup image is displayed along with a progress bar. While booting, a series of services and settings is initiated, including the network configuration. If your network is configured for the use of DHCP, no changes...
11 Save changes Clicking Save in the setup application will save changes made before to the IGEL one configuration file. Clicking OK will not only save your settings but also terminate the setup program and let the new settings become active.
Need help?
Do you have a question about the ONE and is the answer not in the manual?
Questions and answers