Diamond Digital A101 User Manual page 44

Mitsubishi wireless usb adaptor user's manuals a101
Table of Contents

Advertisement

Troubleshooting
Problem
I cannot connect to other
computers linked via an
Access Point or Ad-hoc
network.
I always have poor link
quality and low signal.
Why do I get the warning
"Hi-Speed USB Device
Plugged Into
Non-Hi-Speed USB Hub"
message when I
connected the A101 USB
Wireless LAN Adapter to
the USB port?
Diamond Digital A101 Wireless USB Adaptor
• Check if the device and the other station
have the same Encryption. If WEP
encryption is enabled, set the same
WEP keys for the device and the AP.
• Check if the device and the other APs and/
or clients have the same Encryption. If
you enable WEP encryption, you must set
the same WEP keys for the device and the
other APs and/or clients.
• Check the TCP/IP settings (IP address,
subnet mask, gateway, and DNS) of your
computer.
• Enable file and printer sharing in each
client computer to allow file sharing.
Do the following to achieve better link
quality and stronger signal:
• Keep the device away from microwave
ovens and large metal objects to avoid
radio interference.
• Shorten the distance between the
device and the AP/station.
This warning mesage appears when you
plug the A101 Wireless USB Adaptor into
a USB 1.1 port.
• For Windows® XP users, you need to
upgrade your OS to Service Pack 1 to
add USB 2.0 support.
• For Windows
®
install Service Pack 4 in order to add
USB 2.0 support. You can download
these service packs from the Windows
Update website
(windowsupdate.microsoft.com)
Action
2000 users, you must
4-4

Advertisement

Table of Contents
loading

Related Products for Diamond Digital A101

Table of Contents