Subscribe to Our Youtube Channel
Related Manuals for EVOC PPC-1261
Summary of Contents for EVOC PPC-1261
- Page 1 特种计算机 Embedded Computer 产品说明书 User Manual PPC-1261 12.1″平板电脑 12.1″ Panel PC Version: C04...
-
Page 2: Legal Information
If the products or components from oth er companies are required, please get the recommendation and grant from EVOC fi rst. Proper transportation, st orage, assembly, installation, debugging, op eration and maintenance are prerequ isite to ensure product safety an normal operation;... -
Page 3: Copyright Notice
Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies. -
Page 4: About This Manual
About this manual Scope of the Manual The manual is appropriate for EVOC PPC-1261. Convention The term “the PC” or “the Product” within the manual usually stands for EVOC PPC-1261. Instruction Safety instructions To avoid proper ty losses or individual injury, please pay attention to the safety instructions within the manual. -
Page 5: Table Of Contents
C o n t e n t s 1. Product Introduction ....................1 1.1 Overview .......................1 1.2 Product Specifications ...................1 2. Application Scheme ....................4 2.1 Transportation....................4 2.2 Storage......................4 2.3 Opening the Box and Initial Examination............5 3. Installation ........................6 3.1 Mounting Method..................6 3.1.1 Embedded Panel Snap-fit Mounting ............6 3.1.2 VESA Standard Support ing Arm Mounting..........7... - Page 6 6.2 Removal and Installation of the Motherboard ..........20 6.2.1 Installin g the Motherboard ...............20 6.2.2 Removal of the Motherboard..............21 6.3 Remova l and Installation of HDD ...............22 7. EVOC One-Button-Recovery Operating Instructions..........24 7.1 EVOC On e-Button-Recovery Operating Instructions........24 7.2 Instructions fo r Anti-virus Function ............28 8. Appendix.........................29...
-
Page 7: Product Introduction
Product Introduction 1. Product Introduction 1.1 Ove rview PPC-1261 is a 12.1″ low power consumption and fanless industrial panel PC. Its front panel is shaped by al-alloy and its al-alloy rear panel also serves as the heat sink. PPC- 1261 contains Intel® ATOM N455 + ICH8M chipset, Intel® low power consumption ATOM N455 CPU (clock speed: 1.66GHz) on-board;... - Page 8 320mm (L) x 242mm (W) x 70.6mm (H); Dimensions Weight 5 Kg; Operating temperature: -10℃～50℃ Extendable Operating Temperature: -30℃～70℃ Storage temperature: -20℃～60℃ Temperature Extendable Storage Temperature: -40℃～85℃ Operating Wet & Humidity: 40℃, 95% RH. PPC-1261 - 2 -...
- Page 9 Chapter 7 of the manual for d etailed information); Software EVOC MBR anti-virus function (please refer to Chapter 7 of the manual for detailed information); Function EVOC BPI function (please refer to the motherboar user manual in the CD). PPC-1261 - 3 -...
-
Page 10: Application Scheme
Under this circumstance, please make su re no water drop (c densation ) is formed on the surface or interior of the device. If densation is formed on the device, please wait for over twelve hours before necting the device. PPC-1261 - 4 -... -
Page 11: Opening The Box And Initial Examination
● Please check whet her the delivery contains the intact device and all of the independe ntly orde red accessories. Please contact the customer service when any unconf ormity or transportation damages occur. PPC-1261 - 5 -... -
Page 12: Installation
Note: as for the installation requirements, please see the table below. Step 2: Fix the mounting bracket by screws (spec.: M4*10) Note: The mounting bracket and the screws are the accessories of the PC. PPC-1261 - 6 -... -
Page 13: Vesa Standard Supporting Arm Mounting
PC or select screws according to the instructions VESA supporting Screw bracket of the manual. Warning The weight bearing capacity of VESA arm shall be at least twice the weight of the PPC-1261 - 7 -... -
Page 14: Outer Appearance And Dimensions
Installation 3.2 Outer Appearance and Dimensions Unit: mm PPC-1261 - 8 -... -
Page 15: Insta Llation Dimensions
Installation .3 Instal lation Dimensions .3.1 Instal lation Dimension Unit: mm 3.3.2 Dimensions Drawing for Hole Drilling Unit: mm PPC-1261 - 9 -... -
Page 16: Device Connection
The equipotential bonding terminal ① on the device shall be connected with the cabinet installed with the PC or the central grounding busbar on the device. The minimum cross section area of the cable shall be no less PPC-1261 - 10 -... -
Page 17: Connecting The Device To Power
②, and connect the power switch ①. Danger Disconnect the power source and data ca ble during a lightning storm. Attention The PC is completely isolated from the power supply only by disconnecting the power connector. PPC-1261 - 11 -... -
Page 18: Instructions
Instructions 5. Instructions 5.1 Product Outline - 12 - PPC-1261... -
Page 19: Ports For External Control
. J7 (COM1, COM2) and J8 (COM3, COM4) support RS-232/RS-422/RS-485 modes. Their pin definitions are as follows: Signal Name RS-232 RS-422 RS-485 DCD# DATA- DATA+ DTR# J7, J8 (COM1～COM4) DSR# RTS# CTS# PPC-1261 - 13 -... -
Page 20: Can Port Controller Address Setting
VCC are all isolated. 5.3.2 CAN Port Controller Address Setting This board provides two CAN ports. Their controller address is set by SW1 (on the back of the board). The default setting is 1100, address 300. Code Bit Status - 14 - PPC-1261... -
Page 21: Com Port Mode Selection
3 ON 3 OFF 3 OFF 4 OFF 4 ON 4 ON Note: Under RS-485 mode, the data send/receive direction is automatically controlled. 5.3.4 USB Ports Signal Name USB_Data- J5 (USB1, USB2) USB_Data+ J6 (USB3, USB4) USB5 PPC-1261 - 15 -... -
Page 22: Network Ports
ACTLED Network Network (two colors: Speed (Single color: orange/green) Activity green) Green 1000Mbps Data being Flash Orange 100Mbps transmitted No data being 10Mbps transmitted 5.3.6 PS/2 Keyboard/Mouse Port Signal Name Signal Name KB_DATA MS_DATA KB_CLK MS_CLK - 16 - PPC-1261... -
Page 23: Vga Port
The carrier board provides one 3P horizontal Phoenix term al socket tch: 5.08 mm), which supports single power supply input, w ith v oltag e inpu t range: 9V 30V DC. Its ～ pin definitions are as follows: Signal Name PWR1 PPC-1261 - 17 -... -
Page 24: Operation Control
LC D screen to indicate One-Button-Recovery ction. Then press SW2 to ② wait for the One-Button-Recovery terface. As for how to realize this function, please refer to the BIO S Function of this manual. - 18 - PPC-1261... -
Page 25: Assembly And Maintenance
9. Software dog bracket module 10.CF card (or HDD) 1.HDD (or CF card) 12. Chassis b 13. HDD cover 4. Chassis top cover 15. Motherboard heat sink 16. Power supply heat sink 17. Motherbo 18. IO bracket PPC-1261 - 19 -... -
Page 26: Removal And Installation Of The Motherboard
IO board following the above picture, then install th e asse mbled PCB part onto the r ight position i nside the chassis; f inally fast it with screws. Note: During the installation process, anti-static gloves must be worn! - 20 - PPC-1261... -
Page 27: Removal Of The Motherboard
(thi s cable only exists when there is a touch screen) from the IO boar 2. Take apart the panel from the chassis body as per the fo llowing pictur PPC-1261 - 21 -... -
Page 28: Removal And Installation Of Hdd
1. First assemble the HDD onto the HDD bracket, as shown in the above picture. Then fix it with the HDD cover lock and install them into the right position as per the following picture (CF card is to be directly installed on the HDD cover); - 22 - PPC-1261... - Page 29 Assembly and Maintenance 2. Follow the above picture to dismantle the HDD or CF card module from the chassis, then separate the HDD or CF card from its bracket. PPC-1261 - 23 -...
-
Page 30: Evoc One-Button-Recovery Operating Instructions
When both CF card and hard disk are installed in PPC-1261, the CF card is set as the primary disk of the PC in default and the last hard disk is set as the secondary disk of the PC. - Page 31 Press “DEL” key to enter the BIOS Setup interface after the power-on interface appears. Find the BOOT option in BIOS Setup interface, set the EVOC Backup option to [Enable] or [Disabled] the EVOC One-key Recovery Function. As for the implementation on SATA hard disk, please set the operating...
- Page 32 3） If the system prompts “Save system success!”, it indicates that the system has been backed up successfully and the system will reboot after 5 seconds. 4） After rebooting, set the Boot option in BIOS to disable EVOC One-key Recovery Function.
- Page 33 “restore”. Reference Data from Experiment The table below lists the data from EVOC one-key recovery function test, which are used for reference only. Table 1 Value from EVOC One-key Recovery Function Test...
-
Page 34: Instructions For Anti-Virus Function
2.6.35/32Bit 7.2 Instructions for Anti-virus Function The EVOC MBR anti-virus function is integrated in BIOS, which is well protected from damage from other software (including virus); therefore, it provides excellent defending and safety features. The instructions for the anti-virus function are as follows: During POST period, press “Del”... -
Page 35: Appendix
BIOS Incorrect BIO S setting date on PC Setup; adjust the time and date in BIOS Setup. setting Insufficient backup battery corre ct while the Replace the battery capacity time and date are PPC-1261 - 29 -... - Page 36 Enter the system (usually WinPE powering on system) with a bootable disk; System files on the hard check whether the system in the disk are damaged hard disk is damaged. Rei nstall the system if necessary. - 30 - PPC-1261...
- Page 37 IO Poor contact of the slot card, u nstable fixing or improper dust-proof measures; please card can be used when used aga remove and install the card for a few times or use another slot. PPC-1261 - 31 -...
Need help?
Do you have a question about the PPC-1261 and is the answer not in the manual?
Questions and answers