Download Print this page

Intronics FT-101 Installation Manual

Freezer thermostat

Advertisement

Quick Links

1.
APPLICATION
FT-01 and FT-102 are the freezer thermostat with precise temperature control and all enhanced features
such as Defrost, Compressor delay protection, etc. The size is according to DIN standard.
FT-101 is equipped with 1 temperature sensor while FT-102 is equipped with 2 sensors, temperature
and defrost sensors.
Compressor relay (A)
Fan relay (A)
Defrost relay (A)
Light relay (A)
Remark : 1. Relay'
2.
FEATURES
2.1 TEMPERATURE SETTING
Press and hold
q
temperature inside the freezer to be the setting temperature in blinking.
Press
q
Note : The temperature range can be selected see Program 01 & 02 of Section 3.
2.2 COMPRESSOR OPERATION
The compress will be turned on if
Hysterisis temperature can be chosen in a range of 1 - 9 °C , see Program 03 of Section 3.
P/N 170195-000E Rev. 00
s rating is 8A resistive load and 3A inductive load.
button for 3 seconds, the display will change from showing the
or
button for temperature setting.
Temp. inside freezer (T) ³ Setting temp. (T
INSTALLATION MANUAL
FT-101
1
8(3)
-
-
8(3)
) + Hysterisis temp. (T
set
INTRONICS
FT-101, FT-102
Freezer Thermostat
FT-102
8(3)
8(3)
8(3)
-
)
hys
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the FT-101 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intronics FT-101

  • Page 1 FT-01 and FT-102 are the freezer thermostat with precise temperature control and all enhanced features such as Defrost, Compressor delay protection, etc. The size is according to DIN standard. FT-101 is equipped with 1 temperature sensor while FT-102 is equipped with 2 sensors, temperature and defrost sensors.
  • Page 2 INTRONICS 2.3 DEFROST Defrost processor are different in models FT-101 & FT-102. They are FT-101 Enter into defrost process While in Defrost process Exit from Defrost process Compressor stops Defrost duration is Press button to start process reached or the Defrost cycle is reached...
  • Page 3 INTRONICS 2.7 KEYBOARD LOCK To lock/unlock the keyboard is by pressing at the same time for 3 seconds. 2.8 SENSOR ERROR If the temperature sensor is failed (open or short circuit), the alarm is displayed and the compressor will be turned on 5 minutes and turned off 5 minutes in sequence.
  • Page 4 INTRONICS INSTALLATION Take out the spring lock Making the 30X71 mm. hole at the freezer Insert the thermostat Put the spring back and push until it is locked Wiring diagram P/N 170195-000E Rev. 00...

This manual is also suitable for:

Ft-102