Appendices; Appendix A: Specifications - Mitsubishi WD-57833 Owner's Manual

68

Appendices

Appendix A: Specifications

Size, Weight, and Power Consumption
Dimensions (inches)
Model
Height Width
WD-57833 35 51.3
WD-65833 39.5 58.2
WD-73833 43.6 65.2
Inputs
Type Qty. Input Specifications
Antenna/Cable 2 RF
input F connector, 75-ohm
HDMI (digital CEA-861D standard for digital audio
4
video/audio) and video via HDMI
HDMI standard connector
Video:
Audio: PCM stereo
PC (digital signals only):
VGA (640 x 480, 60 Hz)
W-VGA (848 x 480, 60 Hz)
SVGA (800 x 600, 60 Hz)
W-SVGA (1064 x 600, 60 Hz)
XGA (1024 x 768, 60 Hz)
1280 x 720, 60 Hz
SXGA (1280 x 1024, 60 Hz)
1920 x 1080 (24 Hz, 30 Hz, 60 Hz)
WXGA (1360 x 768, 60 Hz))
Composite 3 NTSC 480i only
Video Video:
S-Video 2 Four-Pin DIN Plug
Y: 1.0 Vp-p 75-ohm
C: 0.286 Vp-p (burst signal), 75-ohm
Component 3 CEA-770.1 & CEA 770.2 480i, 480p,
Video (Y/Pr/Pb) CEA 770.3 720p and 1080i (TV
analog component video standards)
RCA Pin Plug
Y: 1.0 Vp-p (includes sync), 75-
Pr: 700 mV p-p, 75-ohm
Pb: 700 mV p-p, 75-ohm
USB Photo Port 1 For transfer of JPEG files only.
Audio Inputs 6 Analog left and right audio
pairs RCA Pin Plug 500 mV (full scale), 43-k
ohm
IEEE 1394
2 IEEE 1394 Four-Pin-Type Terminal,
(input/output) S400
M-Link
1 RS-232 control
Outputs
Description Qty. Output Specifications
Audio Speakers 2 5.75" x 2.4"
Weight
Power
(lbs.)
Depth
13.9 62.4 275
15.4 78.0 275
17.5 92.6 275
60 Hz: 480i, 480p, 720p, 1080i
24 Hz, 30 Hz, 60 Hz: 1080p
RCA Pin Plug, 1.0 V p-p,
75 ohm
ohm
Outputs
Description Qty. Output Specifications
RCA Pin Plug, 500 mV rms + 200 mV
Analog Audio
1
(Signal)
pair (full scale) for analog sources, 1.5
Vrms + 0.5 Vrms (full scale) for digital
sources.
Digital Audio 1 RCA Pin Plug, Signal Type Dolby
Output Digital, PCM stereo
Record Video 1 Video: RCA Pin Plug 1.0 Vp-p, 75-ohm
Output Signal Type: NTSC 480i only
RCA Pin Plug, 500 mV rms + 200 mV
Audio
1
pair (full scale) for analog sources, 1.5
Vrms + 0.5 Vrms (full scale) for digital
sources.
3-D Glasses 1 VESA 1997-11 Connector and Signal
Emitter
Standards for Stereoscopic Display
Hardware
Image Technology
DLP, 0.65" chip, 1920 x 1080 pixels with Smooth
Picture ™
Channel Over-the-Air: VHF 2–13, UHF 14–69
Frequency Analog Cable: 1–125
Reception Digital Cable: 1–135
Over the Air:
Channel
Type*
Cable:
* Note for Digital Channels: The channel numbers displayed on screen are
determined by the broadcaster or cable company and can vary from the standard
frequency number. If there is no channel-number information provided by the
broadcaster or cable company, the TV creates a channel number. The created
channel number uses the frequency number as the main channel number and the
program number as the sub-channel number.
HDMI
The HDMI inputs are compliant with CEA-861D standards for stan-
dard, extended, and high-definition video; digital audio, and HDCP
copy protection.
IEEE 1394 System Compatibility
• This television is designed to conform to IEEE 1394 AV/C
Software standards in effect at the time of development.
This networking and control technology is designed
to provide high-performance digital connections and
product control, making the product easier to use.
• Mitsubishi D-VHS VCRs are fully compatible with this TV
in audio, video, and control.
• As other manufacturers distribute products that use
the IEEE 1394 AV/C standards, they will be responsible
for developing products that meet the standards of the
technology, as well as compatibility testing with other
products. Mitsubishi cannot be responsible for their
efforts, and therefore cannot promise compatibility with
these other products. Any compatibility problems with
other manufacturers' products should be brought to the
attention of those manufacturers.
Lamp
180-watt VIP type
Analog NTSC, Digital ATSC with
sub-channels (all 18 video formats)
Analog NTSC (non-scrambled)
Digital QAM 64 and 256 with sub-
channels (non-scrambled)