DeWalt DW627 Instruction Manual page 16

E N G L I S H
Voltage Amperes
230 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Mounting a cutter (fig. B)
• Insert the locking pin supplied into the hole (4)
to lock the spindle.
• Thread an M12 cutter onto the spindle.
For M8 cutters, use a bit holder (DE6281).
• Remove the pin.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Prior to operation:
• Make sure that the tool is well fixed.
• Check that the spindle is not locked.
• Check that the cutter is correctly installed on
the spindle.
Switching on and off (fig. A)
• To switch the tool on, set the switch to
the I position.
• To switch the tool off, set the switch to
the 0 position.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
en - 4
Cable rating (Amperes)
6 6 6 6
6 6 6 6
6 6 6 6 10
10 10 10 10 15
15 15 15 15 20
20 20 20 20 25
6 6
Lubrication
6 6
Your power tool requires no additional lubrication.
15
15
20
-
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
WALT repair
E
13