AIRFLO AFW900 Instruction Manual

Window wiper

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Instruction Manual

Window Wiper

AFW900

(Read carefully before use)

Table of Contents

Need help?

Do you have a question about the AFW900 and is the answer not in the manual?

Questions and answers

Summary of Contents for AIRFLO AFW900

Page 1 Instruction Manual Window Wiper AFW900 (Read carefully before use)
Page 2 When using electrical appliances, basic precautions should always be followed, including the fact READ ALL INSTRUCTIONS IN THIS MANUAL PRIOR TO USE AND FOLLOW ALL INSTRUCTIONS RECOMMENDED, particularly to avoid the risk of fire, electric shock, injury or damage to your device. We recommend that you keep this booklet carefully and refer to them in case of problems or doubts of use, and transmit to all prospective new owners.
Page 3 resistance of the support to moisture, it is better to always test the surface to be cleaned on an invisible part by rapid passing. The manufacturer does not assume any responsibility in case of damage of any support to be cleaned. •...
Page 4 HOW TO USE YOUR WINDOW CLEANER Charging the battery Connect the charger to charger socket (11) and take the terminal on the other hand to power supply, which must comply with the standards. A red light will illuminate and change to green when the battery is fully charged. We recommend that you unplug your charger when charging is fully completed (green light on) after 2 hours of charging It is better to store the unit only after recharging for optimum battery life.
Page 5 Cleaning Press on the spray trigger (2) Figure 4, and place the water or the mixture on the surface to be cleaned by directing the spray (10) in its direction. You can turn around the device by grasping handle B, and then you can rub your smooth surface with either one of the 2 wipes.
Page 6 Setting and cleaning wipes Put the wipe support (3) in front of you Figure 6, then position the pad in place taking care to keep even the entire length, then press the entire surface to increase the effect of scraping. The change of wipe will simply be made by tearing it off Figure 7.
Page 7 discharge which would be detrimental to your battery life. Therefore there is no monitoring or control light, your device automatically stops. Technical problems and solutions Problems encountered Possible identifications Proposed solutions The device suddenly Battery charge is too low Recharge the battery stops or does not start No liquid spray Needs more cleaning water...