Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Aurora Multimedia RS-232
-
Page 1: User Manual
RS-232/Contact Closure Controllable Digital Audio Player USER MANUAL 010601... - Page 2 Introduction iOS is an RS-232/contact closure controllable digital audio player. Fifty RS-232 controllable presets, the ability to store a total of two, four or eight minutes of audio clips (depending on the model) and contact closures allowing 4 presets to be trigger, make iOS suitable for multiple applications.
-
Page 3: Rear View
Tip: You can also use your PC’s sound card Line In to monitor your iOS recordings. 2) You also need to connect a serial cable* from the iOS unit’s RS-232 port to one of the serial ports of your PC. - Page 4 The iOS Studio is a program designed to be used with the iOS unit. With it, you can play .wav files and transmit code out the RS-232 port of a Windows based PC. It is similar to a regular Windows media player except it has a place to enter a preset number that determines which preset in the iOS unit is to be recorded.
- Page 5 2) If you want to add .wav files from other directories, click the BROWSE button to select alternate locations. Note that the directories can be located on either on your local machine or a network drive; if they are on the network drive, the drive needs to be mapped to your machine.
- Page 6 We have found that adjusting the volume control on the PC to maximum and adjusting the iOS Studio Volume Control to 70% records good quality sound clips. Play Button: Clicking on this button plays the sound clips recorded in the iOS unit.
- Page 7 The green LED on the front of the iOS unit should be ON. Verify that the RS-232 cable is connected to the iOS unit and the your PC comm port. Make sure that the cable is wired correctly. Only pins 2, 3, and 5(gnd) should be connected.
- Page 8 6V DC RS-232 Port: DB9 Female Connector [For RS-232 control use only a 3 conductor cable using pins 2, 3, 5] [For Contact Closure control use pin 5 as gnd. and pins 6, 7, 8, 9 as contacts.] RS-232 Rating...
Need help?
Do you have a question about the RS-232 and is the answer not in the manual?
Questions and answers