Table of Contents
Advertisement
Item
Enable Setting
Title
Motion
Detection
Digital Input 1
Enable
Schedule Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD
CARD
Trigger Digital
output for xx
second(s).
Description
Check this box to enable this event. If you just want to disable
this event temporarily, you can uncheck this box to keep this
event and disabling while not deleting it.
Input any description text for this event so you can identify it
quickly. You can use alphabets, numbers, and symbols
include: !$-.@^_~ (no spaces allowed).
Check this box and this event will be activated when one of
motion detection window detects motion.
Check this box to enable and setup digital input trigger level.
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select 'Always' as time, this event will be
activated during all the day.
Check this box and IP camera will save file on FTP server (refer
to 'FTP Server' setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will send an Email to designated
recipient address (refer to 'SMTP Server' setting in 'Event
Server' tab) when this event is activated.
Check this box and IP camera will save file on samba server
(refer to 'Samba Server' setting in 'Event Server' tab) when this
event is activated.
Check this box and IP camera will save file on Micro-SD card
when this event is activated. A working Micro-SD card must be
inserted into IP camera in advance.
Check this box and IP camera will trigger digital out to 'high'
state for xx seconds when this event is activated, where 'xx'
seconds must be defined by the dropdown list.
52
Advertisement
Table of Contents
