Specific Safety Rules - Work Sharp Ken Onion Edition User Manual

parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
Have your power tool serviced by a qualified repair person using only identical
•
replacement parts. This will ensure that the safety of the power tool is maintained.
Darex, LLC
210 E. Hersey St.
Ashland OR 97520
USA
Langevin & Forest
9995, Pie-IX Blvd
Montreal, QC H1Z 3X1
Canada
• Do not dispose of electrical products with household waste.
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
• To replace a damaged power supply cord (Type Y), your power tool must
be returned to the Service Center.

Specific Safety Rules

• WARNING:
ALWAYS use proper safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if operation
is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT.
• WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals, work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
6
More service centers at www.worksharptools.com
Tel.: 1 (800) 597-6170
Fax.: 1 (541) 552-1377
E-mail: techsupport2@darex.com
Internet: www.worksharptools.com
Tel.: 1 (514) 322-9330
Fax.: 1 (514) 322-8140
Internet: www.langevinforest.com