Summary of Contents for Ecopower Heating RT500RF
-
Page 1: Installation Instructions
Installation Instructions RT500RF Programmer/Receiver www.ecopowerheating.co.uk / 0845 474 1478 / enquiries@ecopowerheating.co.uk... - Page 2 EC Marking Directive 93/68/EEC • SAFETY INFORMATION These instructions are applicable only to the RT500RF model and must not be used with any other make or model. This accessory must be fitted only by a competent person, and installation must comply with the guidance provided in the current editions of BS7671 (IEE Wiring Regulations) and “Part...
- Page 3 CONNECTING THE RF RECEIVER UNIT NOTE: Ecopower Heating advise that all electrical installation work should be carried out by a suitably qualified electrician or other competent person.
- Page 4 Installation Instructions RT500RF Programmer / Receiver CONTROLLING MULTIPLE RADIATORS FROM A SINGLE PROGRAMMER To control a series of radiators from a single programmable thermostat, some changes need to be made to the DIP switches and jumpers in order to adjust the RF address code setting.
- Page 5 The manufacturer warrants that this item (RT500RF) will be free from manufacturing defect for a period of 2 years from date of purchase and will repair or replace defective items for this period under the terms and conditions.
Need help?
Do you have a question about the RT500RF and is the answer not in the manual?
Questions and answers