Gigabyte G1.Sniper B7 User Manual page 7

USB Chipset:
Š
- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 5 x USB 2.0/1.1 ports (1 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x Thunderbolt
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x audio gain control switch
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x DVI-D port
Š
1 x HDMI port
Š
4 x USB 3.0/2.0 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
1 x optical S/PDIF Out connector
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Š
Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
Š ®
Hardware System voltage detection
Š
Monitor CPU/System temperature detection
Š
CPU/System fan speed detection
Š
CPU/System overheating warning
Š
CPU/System fan fail warning
Š
CPU/System fan speed control
Š
* Whether the fan speed control function is supported will depend on the cooler you
BIOS 2 x 64 Mbit flash
Š
Use of licensed AMI UEFI BIOS
Š
Support for DualBIOS
Š
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Š
add-in card connector
™
install.
™
- 7 -