Safety Information - Schaefer Pro-Kool PROK142-220V-50 User Manual

Safety Information

Warning and Danger Decals have been placed on the equipment to warn of potentially dangerous situations.
Care should be taken to keep this information intact and easy to read at all times. Replace missing or damaged
safety decals immediately.
Using the equipment for purposes other than specified in this manual may cause personal injury and/or damage
to the equipment.
Safety Alert Symbol
This is a safety alert symbol. When you see this symbol on your equipment, be alert to the potential
for personal injury. This equipment is designed to be installed and operated as safely as possible...
however, hazards do exist.
Signal words are used in conjunction with the safety-alert symbol to identify the severity of the warning.
CAUTION indicates an imminently hazardous situation, which, if not avoided, COULD cause damage to your
equipment or equipment failure.
WARNING indicates a potentially hazardous situation, which, if not avoided, COULD result in death or serious
injury.
Follow Safety Instructions
Carefully read all safety messages in this manual and on your equipment safety decals. Follow recommended
precautions and safe operating practices.
Keep safety decals in good condition. Replace missing or damaged safety decals.
Decal Descriptions
This diagram shows the proper location of the safety decals as shipped from the factory. Replace damaged or
missing decals. Make sure the decals are easy to see at all times.
actoolsupply.com
PLEASE NOTE
• Minimum inlet pressure is 10 PSI.
• Maximum inlet pressure is 100 PSI.
• Never leave unit unattended while in operation.
4
actoolsupply.com