Table of Contents
Advertisement
Page 16
OPERATION (for KEY FOB OPERATION)
REMOTE ENGINE START
To start a vehicle remotely, press and release the LOCK button twice within two seconds, then press and
hold the LOCK button for three seconds.
STEP 1. Press and release the LOCK button on the remote twice within two seconds. The hazard lights will
flash each time.
A) Press and
release
the LOCK
button.
UNLOCK
STEP 2. Press and hold the LOCK button on the remote for three seconds. The hazard lights flash once when
pressed, then again after three seconds. The engine starts, and the hazard lights flash for 20 seconds.
A) Press and
hold the
LOCK
button for
three
seconds.
UNLOCK
NOTE: Vehicles started with the Remote Engine Starter can idle for a total of 20 minutes, however
automatic engine shutdown occurs after 10 minutes of run-time. You can always restart the Vehicle after
this initial shutdown. Once the total run-time exceeds 20 minutes the vehicle must be manually started
in order to reset the Remote Engine Starter.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times that the light
flashes.
For any questions or concerns about the Remote Engine Starter, please call Lexus Customer Relations
at (800) 255-3987.
TWO SECONDS
B) The hazard
C) Press and
lights flash
once.
FOLLOWED IMMEDIATELY BY:
THREE SECONDS
B) The hazard
C) After
lights flash
three
once.
seconds,
the hazard
lights flash
again.
D) The hazard
release the
lights flash
LOCK
again.
button again.
UNLOCK
20 SECONDS
D) The engine
starts and the
hazard lights
flash for 20
seconds.
LEXUS — RES+
Advertisement
Table of Contents
