Subscribe to Our Youtube Channel
Summary of Contents for Adventure Extreme Buggy
- Page 1 Instruction manual Adventure Extreme Buggy Keep for future reference. To reduce the risk of serious injury or death, read this owner’s manual prior to using this product. designed in NZ...
-
Page 2: General Warnings
GENERAL WARNINGS To greatly reduce the risk of injury or death, please read this owner’s manual before installing and using this stroller to ensure proper use. Stroller • NEVER LEAVE YOUR CHILD UNSUPERVISED IN THE STROLLER. • ALWAYS APPLY THE PARKING BRAKE WHEN YOU PARK THE STROLLER OR WHEN TAKING YOUR CHILD IN/OUT OF STROLLER. - Page 3 Keep away from fire and extreme heat. Do not store in areas that may get particularly hot in summer like roof space or beside shed walls. By following instructions as well as care tips, your stroller will last for many years to come. If in doubt, please contact Adventure or your retailer.
- Page 4 Stroller components In this manual we will help you with putting your new stroller together. Your Extreme should come with the following: Main components • Stroller frame with seat unit and sun canopy • Rear wheel axle • Car seat capsule •...
- Page 5 Wheel installation and removal Rear axle and wheels: To install the axle, insert the axle tubing to the stroller strut tubing. Ensure it’s installed with the metal button through the hole in the tubing until you hear a CLICK! See picture (a) below. To install the wheel, simply insert the rod on the wheel hole located on each wheel strut until you hear a CLICK!
- Page 6 Unfolding and folding the stroller Unfolding: Lie the stroller on the ground with the handle facing towards you (as pictured in (a). 2. Remove the red locking clip. 3. Lift the handle bar upwards in a quick motion and the buggy will unfold and CLICK! into place.
- Page 7 Car capsule installation and removal Ensure the buggy seat position is set to recline. This allows room for the capsule to fit in place. Insert the adaptor tracks into the stroller frame and click the button simultaneously (as pictured below). Insert the capsule, in a rear facing position, into the adaptors with the handle upright (as pictured below) until you hear a CLICK! Removing the capsule:...
- Page 8 Seat and leg rest adjustment Seat recline: To adjust the recline, pull up the black metal lever at the rear of the seat upwards (as pictured in (a) below) and raise or lower the seat to the desired position (lie flat, reclined or seated). Leg rest height: To raise or lower the leg rest, press the two buttons on both sides of the leg rest hinge (as pictured in (b)) until you hear it...
- Page 9 Securing and unlocking seat harness Securing harness: Place your child in the seat. Make sure that your child’s back and bottom are flat against the seat. This will maximise comfort and allow the harness to properly secure your child. 2. To fit the harness, link the two right hand fittings together and then CLICK! into the buckle.
- Page 10 Parking brake and front wheel lock Parking brake: To engage the brake, with your foot or hand firmly push down the bar located on the rear wheel axle downwards. This brake locks both rear wheels. Always check the stroller is firmly located. To release the brake, lift the lever upwards.
- Page 11 Caring for your stroller Important information • We recommend storing your stroller indoors to avoid corrosion. • We recommend regular inspection and maintenance of locking devices and security of essential components. • Regularly check all parts for wear and tear. Lubricate if tight with a silicone based product.
-
Page 12: Warranty Information
Warranty information All Adventure products are guaranteed for one year from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Adventure.
Need help?
Do you have a question about the Extreme Buggy and is the answer not in the manual?
Questions and answers