Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for M-View OnCall Wi-Fi Pro
- Page 1 M-VIEW® USER GUIDE ONCALL WI-FI PRO (FOR ANDROID) | V.1.0...
-
Page 2: Glossary Of Terms
GLOSSARY OF TERMS • Live streaming / Broadcasting: Refers to the sending of a real-time video and audio data stream to the m-View Server that can be watched by one or many viewers in real-time. • Oncall Wi-Fi Pro: The body worn camera, also referred to as “Oncall Camera” or simply “camera”... - Page 3 Wearing the Oncall Camera The mounting clip supplied with the camera can be rotated 360° to allow mounting on a variety of garments. It is recommended that the camera is mounted upright for best recording result. Examples of the flexibility of the mounting clip Removing the Mounting Clip 1.
-
Page 4: Changing Batteries
Changing Batteries - Push the battery release clip downwards - Slide the battery out - Slide the new battery in Push the battery release clip upwards to lock the battery in place. • Charging the Battery - Open the USB Port cover. - Using the supplied USB cable connect the camera to either your PC’s USB port or the supplied USB Wall Charger. -
Page 5: Recording Video
- Ensure the charging connector on the base of the battery is aligned with the connector in the bottom of the slot. - Press the camera/battery down until it clicks into place. The dock will automatically stop charging when the battery is fully charged. -
Page 6: Night Vision Mode
IT administrator for details on how to access the app and correct settings. NOTE: The Oncall Wi-Fi Pro app is for the Oncall Wi-Fi Pro Camera. The Fire Cam Wi-Fi Pro Camera uses a different app and is not interchangeable. - Page 7 Entering User Settings - Start the Oncall Android App. - Tap on Go Live When first installed the app will prompt you for user credentials. - Enter Username - Enter Password Check Server Details: Media Server au0.mview.com.au Web Server demo.mview.com.au Media Port 6116 Encryption Port 6120...
- Page 8 Connecting to the Oncall Wi-Fi Pro Camera Tap on Wireless Cam Tethering Details This dialogue sets up the Wi-Fi AP (access point, or hotspot) that the mobile will transmit for the Oncall Camera to connect to. Enter the following details (Default)
-
Page 9: Changing Camera Settings
Once connected, the camera will appear as an IP address in the camera list. Tap the IP address to assign a name to the camera. Edit the Camera name field (letters and numbers only, no commas etc). The name you enter will now be displayed in the camera list. - Page 10 Camera System Settings Power Off:Automatic power off mode when camera is not in use: Off, 3 min, 5 min, 10 min, Now. Recommended setting is Off for general use. Pre-Recording: If Pre-Recording mode is activated the camera will continuously record while powered on. When the Video Record button is pressed, the 3 minutes prior to the button press will be captured without audio.
- Page 11 “View Live Video” To broadcast live using the phone’s in-built camera tap “Broadcast Video” To connect to and use the Oncall Wi-FI Pro camera tap on “Wireless Cam” NOTE: This manual deals only with the Wireless Cam f eatures. Refer to the app’s in-built quick-start guide for using the phone’s internal camera...
-
Page 12: Camera Button
Once connected, the camera will appear as an IP address/ camera name in the camera list. Now Press Play button to connect to the camera’s live view finder view Using the App to control camera recording In the viewfinder mode: Press REC HD to start Video Recording on the Oncall Wi-Fi... - Page 13 To view/listen to the recorded file Tap the play icon. The media file will be streamed to the mobile device (not stored on the device). To add metadata to a recorded file Tap the PENCIL icon. Enter text in the available fields. The Suburb field will look-up the suburb name and postcode as you type.
- Page 14 - Move files off the camera to the PC - Add metadata to recorded files and upload to the m-View Server The following section assumes the m-View® Oncall Camera Manager Software has already been installed on the PC. USB Connection to PC - Ensure that the Camera is turned off - Connect the Camera to a USB 2.0 port on the PC...
- Page 15 The Monitor Service automatically launches the Oncall Camera Manager Application NOTE: If m-View® software is not loaded the camera will not be recognised by the PC Logging In After the app auto-launches, user authentication is required. Enter your username and password...
- Page 16 Clicking on the player pops out the player in a separate window Clicking on the pop-out window activates full-screen mode viewing. Add Metadata to Files Select a file to add metadata to by clicking on it in the list The available Metadata fields are setup for your organisation. Add metadata by inputing text or selecting from drop-down lists of categories.
- Page 17 Accessing the Web Portal The m-View Web Portal is a web-site which acts as the central point for m-View users and administrators to: • View Live Video streams and track broadcaster’s GPS location • Manage uploaded media files and metadata •...
Need help?
Do you have a question about the OnCall Wi-Fi Pro and is the answer not in the manual?
Questions and answers