Download Print this page

Advertisement

Quick Links

AirPower F - 16 EDF JET Instructions Manual
F-16 Durable Foam EDF JET
68~70 mm Electric Ducted Fan or 'Pusher' JET
WARNING!!
This model Is not a toy.
It can be very dangerous and may cause serious damage to people and property. It is intended and designed for
the hobby enthusiast who is an experienced flyer. All novice or beginners should seek help from an experienced
club member, and it is highly encouraged that you join the BMFA to insure you against damage to others
property. Please read all instructions and have an experienced flyer inspect your plane prior to flying.
Model data :
Wing span -------- 75cm (29.5 inches)
Fus length -------- 95cm (37.5 inches)
Flying weight ---- 460/500g
C of G ------------ 105 – 120mm from the Leading Edge (L.E.) on the upper wing surface.
Control Throws--- Ailerons 10mm, elevator 15mm
Required to complete :
Motor ------------ Airpower OM400 2014/3300Kv
ESC ---------------AirPower Melody 25A ESC
Power source ---- Airpower 1500/2000 3S Lithium Battery
Charger-----------Airpower Lithium Charger and Balancer
Servos ------------ 4 x 5g Sub Micro Servos
Receiver ---------- 4~6ch micro.
You can get our company details at :
AirPower Models Co., Ltd.
Taiwan Head office
http://www.airpowernet.com
1
AirPower Models Co., Ltd.
UK
http://www.airpowerrc.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the F-16 EDF JET and is the answer not in the manual?

Questions and answers

Summary of Contents for AirPower Models F-16 EDF JET

  • Page 1 Power source ---- Airpower 1500/2000 3S Lithium Battery Charger-----------Airpower Lithium Charger and Balancer Servos ------------ 4 x 5g Sub Micro Servos Receiver ---------- 4~6ch micro. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd. http://www.airpowerrc.com...
  • Page 2 If you are building your F16 as a ‘pusher jet refer to details at the very end of these instructions. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 3 This takes about 60 seconds. To make it more secure you can apply clear selotape to the TE. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 4 60 seconds. (Picture 9) You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 5 Now remove the foam from under the canopy floor (upper fus moulding) creating a hole for the battery pack. As a guide follow the moulded edge. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 6 4c.Trial fit the two sections of the fuselages together to make sure no fouling is evident and when happy separate them and leave to one side. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 7 Now is a good time to make up four control rods, one for each servo. Cut them about 7cm long. You will need to cut them from the supplies rods in the kit and Z bend the ends. (Picture19 Control rods: P.19 You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd. http://www.airpowerrc.com...
  • Page 8 When in place simply press both sides of the canopy front to secure. Alternatively you can use small magnets. Finally use Foam Safe adhesive to secure the front nose cone. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd.
  • Page 9 Working temperature: 0 ℃ - 60 ℃ Maximum RPM: 2-pole motor / 210,000 rpm 6-pole motor / 70,000 rpm 12-pole motor / 35,000 rpm You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd. http://www.airpowerrc.com...
  • Page 10 Parallel Charging, to ensure each cell is fully charged. Charges 2~4 cell Charge Current Selectable. You can get our company details at : AirPower Models Co., Ltd. Taiwan Head office http://www.airpowernet.com AirPower Models Co., Ltd. http://www.airpowerrc.com...