Panel Type Check - Sanyo PLC-WL2500A Service Manual

Optical Parts Disassembly

Panel type check

There are 2 types of LCD panel/prism assy for this model. Either L-type or R-type LCD panel/prism assy is used on
the projector. Check which type of LCD panel/prism assy is used with the figure below.
When replacing the LCD panel/prism assy, you need to take "Panel type check and setting" on the electrical adjust-
ment for the replaced LCD panel/prism assy.
The gamma-characteristics is different between L-type and R-type LCD panel/prism assy.
How to check the type of LCd panel/prism assy
Check the printed number on the flat cable of the G-LCD panel.
L-type LCd panel/prism assy
-85G10
L3D05X-85G10
a01J6336L9
IMPOrtANt NOtICe on LCd panel/prism assy replacement
L CD panels used for this model can not be replaced separately. Do not disassemble the LCD panel/prism assy.
These LCD panels are installed with precision at the factory. When replacing the LCD panel, should be replaced
whole of the LCD panels and prism assy at once.
When replacing the LCD panel/prism assy, take the optical and electrical adjustments following to the chapter
"Adjustment".
r-type LCd panel/prism assy
-86G10
L3D05X-86G10
a01J6336L9
G-LCD panel
-22-
Fig.5-2