It is crucial to fully charge your BT-10ER before using it for the first time. To do so, please connect the USB power cord to the rear micro USB power socket. Your BT10-ER can be charged via the USB port of your computer or any standard charger featuring a USB port.
® 4.2 - Pairing a Bluetooth device A - Connect one end of the audio cable or audio connector to the Jack socket of your BT10- ER, while connecting the other end to your device (smartphone, etc.). ® B - Switch to TX mode and position your BT10-ER within 1 meter of your Bluetooth...
Page 5
Receiver 4.3 - Further details A - If the BT10-ER is paired with a aptX compatible device, the indicator LED will flash three times in 4 seconds. The aptX codec guarantees a very low latency and much higher sound ®...
5.2 - Pairing a Bluetooth device A - Connect one end of the audio cable to the Jack socket of your BT10-ER, while connecting the other end to your sound system (e.g. amplified speakers). B - Enter RX mode, and position your BT10-ER within one meter of your Bluetooth® device.
5.3 - Further details A - Your BT10-ER wil enter sleep mode if the pairing has not been completed within 2 minutes. B - The PIN code of your device must be 0000, 1111, 8888 or 1234 to connect with your BT10-ER.
Your BT10-ER is fully operational while the battery is charging. 6.3 - Reconnecting to a Bluetooth® device A - Auto connection: Your BT10-ER will automatically try to connect to the last device used upon activation. B - Manual connection: Short press the multifunctional button to exit stand by mode and try to automatically reconnect to the last device used.
• Do not drop your BT10-ER as it may cause severe damages and/or destruction of its internal structures. • Do not open your BT10-ER as its internal parts can only be repaired by a qualified technician. • Please make sure the volume is at its lowest before deactivating your sound system in order to prevent hearing damages.
This product complies with the following European directives: 99/5/EC - 2004/108/EC and following norms: LVD : EN60950-1:2006+A11:2009+A1:2010+A12:2011 EMC : EN301489-17:V2.1.1:2009 + EN301489-1:V1.8.1:2008 RADIO : EN300328:V1.7.1:2006 EMF : EN62479:2010 AUDIOPHONY-HIT MUSIC S.A. - Parc d’Activités du Sycala - 46091 CAHORS CEDEX 09 - FRANCE www.audiophony.com Page 10...
Page 11
English ® BT10-ER - Bluetooth Transmitter/receiver Page 11...
Page 12
That is why technical specifications and the products physical configuration might differ from the illustrations. ® Make sure you get the latest news and updates about the AUDIOPHONY products on www.audiophony.com ®...
Need help?
Do you have a question about the BT10 and is the answer not in the manual?
Questions and answers