Operation - HAMPTON BAY HB-7830-02 Use And Care Manual

Operation

1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control.
Press the "+" button to increase the volume. Press the
"–" to decrease the volume.
2
Adding tunes to the doorbell
The suggested tune length is 2-15 seconds. The
maximum tune length is 20 seconds. If the tune is
longer than 20 seconds, only the first 20 seconds will
play.
Connect the USB cable (FF) to the doorbell (A)
and the computer.
Click "Open Folder to View Files."
Drag the desired tune to the doorbell (A) drive.
Disconnect (eject per computer operating
system) the doorbell (A) from computer.
Remove the USB cable (FF).
3
Selecting a tune
The doorbell (A) allows you to customize your doorbell
sound with front door tunes. The default setting for the
front door push button (B) is "Ding-Dong" and the rear
door is "Ding".
Use the arrow buttons to cycle through the
tune list (" " - scrolls down the list; "
scrolls up the list).
Stop when the desired tune plays. The last
tune played will play when the front door push
button (B) is pressed. When the desired tune is
selected it will play every time the front door
push button (B) is pressed.
Setting the wireless push
4
button
The wireless push button (B) has two options for tune
selection: Play the selected "FRONT" door musical
tune or play the "REAR" door designated tune (Ding).
Remove the single jumper (AA) inside the push
button (B) to play the selected musical tune.
Add the single jumper (AA) inside the push
button (B) to play only the Ding tune.
IMPORTANT: The door chime will not play when connected to the
computer.
IMPORTANT: Do not delete rear door default file sound.
NOTE: To listen to the selected tune, press and release
the center button "
" -
Remove jumper to
set as the "FRONT" door
6
FF
A
".
B
Add jumper to set
as the "REAR" door
A
A
AA