Advertisement
asdasdasdasd
Step 2:
1.
Attach the Seat Pad (8) to the Seat Support Frame (4) with Bolts
(17-2pcs) and Washers (18-2pcs).
2.
Attach the Pin (10) to Main Frame (1) with Washers (13) and Lock
Nut (14). Connect Spring (24) between Main Frame (1) and Pin
(10).
3.
Attach the Seat Support Frame (4) to Main Frame (1) with Bolts
(12), Washers (13-2pcs) and Lock Nut (14).
WARNING: ONLY HAND TIGHTEN BOLTS & NUTS WHEN
MACHINE IS FULLY ASSEMBLED.
asdasdasd
Step 3:
1.
Attach the Back Pad (9) to the Back Pad Support Frame (5) with Bolts
(17-4pcs) and Washers (18-4pcs).
2.
Attach the back Pad Support Frame (5) to Main Frame (1) with Bolts
(12), Washers (13-2pcs) and Lock Nut (14).
3.
Attach the Adjustable Back Pad Support Frame (6) to Back Pad Support
Frame (5) with Bolts (12), Washers (13-2pcs) and Lock Nut (14).
4.
Attach the Plastic Sleeve (7) to Adjustable back Pad Support Frame (6)
with Bolts (12), Washers (13-2pcs) and Lock Nut (14).
5.
Attach the Roller Pad Tube (31) into Leg Support (29). Place
Upholstered Roller Pad (32) on each side of Roller Pad Tube (31)
secure with Big Plugs (33)
6.
Attach Leg Support (29) to Main Frame (1) with L-Pin (34).
WARNING: YOU CAN NOW TIGHTEN ALL BOLTS AND LOCK NUTS.
6
7
Advertisement
