Advertisement
on tHe Back
item
5
4
3
2
6
1
1 Connect the supplied 16VAC wall-wart. Don't use any other power adapter.
2 Connect your USB source (your computer) to the Modi 2 Uber's USB input with a USB2 cable.
3 Connect your optical source to the optical input jack, using a good Toslink cable, 3m or less.
4 Connect your coax digital source to the coax input jack, using a good RCA cable, 75 ohm preferred.
5 Connect the two RCA jacks, labeled "R" and "L", to your amplifier, preamplifier, or receiver. You may
use long cables—Modi 2 Uber's active output stage drives them with ease.
For USB, select "Schiit Modi 2" as the audio output device in Control Panel (Windows) or System
Preferences (Mac.) For Windows users, you'll have to install drivers from schiit.com/drivers.
6 Turn it on and enjoy your music!
Advertisement
