Getting Started; What You'll Need; Removing The Module From The Band; Charging The Module - Naxa NSW-13 Instruction Manual

Getting Started

What You'll Need

To start using your LifeForce+ Fitness watch, you'll
need the following:
• An internet connection
• A fully charged NSW-13
• A supported smartphone or tablet that has the fol-
lowing:
• Bluetooth 4.0
®
• Android™ OS or iOS

Removing the Module from the Band

You will need to remove the module from the band in
order to charge it.
1. Turn the band over so that the back is facing you,
2. Grip either end of the module at the point where
the band tapers to a thin strap.
3. Gently bend one end of the band away from you, as
Page 6
®
if peeling the band apart. The module will pop free
from the band.

Charging the Module

The module contains all of the sensors and processors,
as well as a built-in rechargeable battery that will
need to be charged from time to time.
Use the included USB cable to charge the module.
1. Remove the main module from the fitness band.
2. Connect the small end of the cable to the micro
USB port [4] of the module.
3. Connect the larger end of the cable to a USB power
source (e.g., a powered computer or laptop, a pow-
ered USB hub, a USB power adapter).
4. The display will show a little animation while it is
charging.
L L
To ensure optimal performance, fully charge
the battery the first time you use the band.
Naxa Electronics