To Display The Dvd Menu; To Display The Dvd Title; 1.5 Times Speed Playback; Screen Saver - LG DH6530T Owner's Manual

30 Operating

To display the DVD Menu

r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1. Press DISC MENU (光碟菜单).
The disc's menu appears.
2. Select the menu by using WSAD.
3. Press d PLAY, MONO/STEREO (播放, 单声道
/立体声) to confirm.

To display the DVD title

r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1. Press TITLE (标题).
The disc's title appears.
2. Select the menu by pressing WSAD.
4
3. Press d PLAY, MONO/STEREO (播放, 单声道
/立体声) to confirm.

1.5 times speed playback

r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press d PLAY, MONO/
STEREO (播放, 单声道/立体声) to play at 1.5
times speed. "dX1.5" appears on the screen.
2. Press d PLAY, MONO/STEREO again to exit.

Screen Saver

The screen saver appears when you leave the unit
in Stop mode for about five minutes.

Starting play from selected time

ry
To start playing at any chosen time on the file or
title.
1. Press m INFO/DISPLAY (快捷菜单) during
playback.
2. Press WS to select the time clock icon and
"--:--:--" appears.
DH6530T-F2.DCHNLLK_ENG.indd 30
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR (清除) to remove
the numbers you entered. Then input the
correct numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter "11020" by using
numerical buttons.
4. Press b ENTER (确定) to confirm. Playback
starts from the selected time.

Resume playback

ryut
The unit records the point where you pressed the
Z STOP (停止) depending on the disc.
If "MZ (Resume Stop)" appears on the screen briefly,
press d PLAY, MONO/STEREO (播放, 单声道/立
体声) to resume playback (from the scene point).
If you press Z STOP (停止) twice or unload the
disc, "Z"(Complete Stop) appears on the screen.
The unit will clear the stopped point.
,
Note
y The resume point may be cleared when a
button is pressed (for example; 1/! (电源)
POWER, B OPEN/CLOSE (开/关仓), etc).
y This function may not work on some disc or
title/track.

Changing subtitle code page

y
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press m INFO/DISPLAY (快捷
菜单) to display the On-Screen display.
2. Use WS to select the [Code Page] option.
3. Use AD to select desired code option.
4. Press x RETURN (返回) to exit the On-Screen
display.
2013-10-23 4:52:35