Advertisement
Quick Links
POLISHER/SCRUBBER
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book carefully
before starting the machine. Keep this book and tell all
operators to read the book. If you do not follow the instruc-
tions, you can cause an injury or damage equipment, furni-
ture or buildings.
For new books write to:
Pacific Steamex, Inc.
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately with
the delivering carrier.
MINI-EDGER
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improvements
to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
MACHINE MODEL AND SERIAL NUMBER:
MODEL_________________________
SERIAL NUMBER________________
Advertisement
Summary of Contents for Pacific Steamex Mini-Edger
- Page 1 For new books write to: Pacific Steamex, Inc. 2259 S. Sheridan Muskegon, MI 49442-6252 FOR YOUR CONVENIENCE, RECORD THE MACHINE MODEL AND SERIAL NUMBER: Carefully inspect all components to ensure that there is no concealed freight damage.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE! WARNING! To reduce the risk of fire, electric shock, or injury: You must be trained to operate this machine. -
Page 3: Operating Procedures
OPERATING PROCEDURES OPERATION WARNING! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal Plug the machine’s power cable into a properly grounded injury and/or damage to machine and property! outlet (see Safety Instructions). - Page 4 MINI-EDGER...
- Page 5 MINI-EDGER PARTS LIST ITEM PART NUMBER DESCRIPTION 908048 Cord Assembly, 18-3, 13in 911064C Switch, Trigger 16A 513951 Handle, Left 513950 Handle, Right 962145 Screw #8 x 5/8 513971 Handle, Adjusting 962173 Bolt, Carriage 5/16-18 x 2 3/4 518203 Spacer, Knob...
- Page 6 MINI-EDGER POLISHER/SCRUBBER The Pacific Mini-Edger has been manufactured, tested and inspected in accordance with specific engineering requirements and is WARRANTED to be free from defects in workmanship and materials as follows: One (1) year – All components unless excluded below.