Advertisement
CABLE LATCH OPERATION
STEP 1: Pull latch down to release connector.
STEP 2: Unwind Thunderbolt cable from
enclosure, and plug in the connector.
NOTE: When storing cable make sure
to press it back into the channel.
LED INDICATOR: The blue LED
is on when the drive is active.
SPECIFICATIONS
INTERFACE: Thunderbolt 10Gb/s
DATA PROTOCOL: PCI Express
DAISY CHAIN: Up to six Thunderbolt Technology-
compatible products. OverDrive Thunderbolt
must be the end point.
CAbLE TECHNOLOGY: Captured 300mm
Thunderbolt Cable (Active/Active)
INTERNAL HARD DISk: Enterprise grade SATA III
(6Gb/s interface) Solid State Drives
COOLING: Passive, aluminum heat sink enclosure
DATA TRANSFER RATE: 500MBps/450MBps -
Tested ATTO ver 2.47, NTFS
2
TEMPERATURE RANGE: Operating 0℃to 70°c,
storage -40 to 95°c℃
1
SIzE: 133mm x 85mm x 15mm
WEIGHT: 7.0oz, 200g
SYSTEM REqUIREMENTS: Computer with available
Thunderbolt port, latest version of Windows
Windows 8 / Mac OS X 10.6 or higher
CERTIFICATIONS AND DECLARATIONS:
CE, FCC, Thunderbolt, IC, Microsoft WHQL
7,
®
Advertisement
