Connecting Your Ipod; To Check For Ipod Compatibility - Mirage OmniVibe Owner's Manual

CONNECTING YOUR iPod

Locate and set the proper depth for your iPod
with your iDial Spacer
onto the connector and have no movement when
you press on it

TO CHECK FOR iPOD COMPATIBILITY

For the OmniVibe system remote control to work as expected, your iPod must have the proper
version (or later) of Apple software installed.
To check the software version your iPod is currently running, select Settings, About, Version on
the iPod display.
If you need to upgrade, simply visit the Apple iPod website and follow the instructions there for
a free download. Go to: http://www.apple.com/ipod/download/
OLDER IPODS, iPOD SHUFFLE, AND OTHER
PORTABLE AUDIO DEVICES
1. Locate the 3.5 mm stereo cable provided with this system.
2. Connect one end of the 3.5 mm stereo cable into the auxiliary input jack (AUX) located on
the back of the OmniVibe, and the other end to the headphone or line out jack on your
portable audio device.
® . The iPod should fit easily
o w n e r s m a n u a l
5