Troubleshooting - DeLonghi ICMO210 Instructions For Use Manual

Hide thumbs Also See for ICMO210:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Descaling
If the water in your area is hard, limescale builds up over time.
These deposits may affect correct operation of the appliance.
You are recommended to descale the coffee maker every 60 cof-
fee making cycles. To descale, always use special commercially
available descaling products for drip coffee makers.
1. Dilute the product in the jug, following the instructions on
the descaler pack;
2. Pour the solution into the water tank;
3. Place the jug on the warming plate;
4. Press the
button, percolate the equivalent of one cup
then turn the appliance off;
5. Leave the solution to work for 15 minutes, then repeat
operations 4 and 5.
6. Turn the appliance on and deliver the water until the tank
is completely empty.
7. rinse by operating the appliance with water only at least 3
times (3 complete tanks of water).
failure to clean as described above invalidates the guarantee.

troubleshooting

problem
The coffee takes longer to
brew.
The coffee has an acidic ta-
ste.
probable cause
The coffee maker needs to be descaled.
Insufficient rinsing after descaling.
Descale the machine as described in the section De-
ScALInG.
rinse the machine as described in the section De-
ScALInG.
6
use
en
Solution

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icmov210

Table of Contents