Table of Contents
Advertisement
3. Installation
TCP/IP mode
Network Configuration
Mode configuration
3.1 Network Settings
(1) Parani100 power-up; 'POWER' and 'STATUS' LEDs display green
(2) Parani100 network configuration: connect Parani100 to PC via RS232 cable
(3) Open HyperTerminal
(4) Set PC COM port;
Baud rate 115200 / 8 Data bit / non-parity / 1 stop bit / no hardware flow control
Parani100 Installation
Configuration via serial cable
Connection from Bluetooth Terminal device
(Parani10)
- 12 -
12
RS232 Mode
Serial Port Configuration
Change of DIPswitch
Advertisement
Table of Contents
