Download Print this page

Vapor Brothers VAPE-PEN DABBLER Instructions

Advertisement

Quick Links

THE DABBLER
Congratulations for choosing the next generation Dabbler!
This instruction manual should get you on your way to
vaporizing in no time. Please don't hesitate to contact us
if you need assistance. Vaporbrothers provides the sales
and support for the Dabbler and backs all parts with our no-
hassle warranty. Enjoy your new Dabbler Vapor Pen!
Contents of the kit:
• Battery with Built-In Charger
• Heater
• Cone
• Mouthpiece
• Pick Tool
• Mini USB Adapter
• Case
The Dabbler™ is an electronic dabbing device which
employs specialized temperature and timing control
circuitry to assure a superior vaporization experience. The
advanced microcontroller is combined with a high-capacity
rechargeable lithium polymer battery to provide 200-400
inhalations on a single charge. All materials used in the
Dabbler's construction are of the highest quality, from the
stainless steel housing to the ceramic heating chamber.
Our team is excited to share this new creation with you,
the cutting edge connoisseurs of herbal supplements.
Getting Started:
Please take a look at the parts in your kit. Dabblers are
thoroughly tested, but if you see something wrong please
Carefully follow the directions to
tell us right away.
charge your Dabbler and test it before applying
any oils.
We only exchange defective parts before the
parts are oily, with the exception of the battery which can
be exchanged any time up to 1 year from purchase. See
warranty info at the end of this document for more info.
Charge your Dabbler fully before first use to avoid
damage to the battery.
the bottom of your pen under the cap. The red LED on the
bottom will turn off when the charge is complete.
Push-Button Lock-Out Feature:
Dabblers ship in their OFF state.
times rapidly to unlock your Dabbler.
light will blink 3 times to indicate that the battery is ON.
Presents
®
BY VAPE-PEN
TM
The mini USB charging port is at
Push the button 6
The button LED
Using your Dabbler:
Before using your dabbler, screw the heater onto the battery.
If you're using your Dabbler for the first time, please
push and hold the button to familiarize yourself
with the operation of the Dabbler and ensure it
works correctly.
Note that the heating coil will stay on for 10 seconds at a time
and burn off any dust that may have settled during shipping.
Remember, we cannot exchange your heater once it's been
used with oils or extracts. Now is the time to test your unit
dry and confirm all is well.
Using the pick tool, place a small amount of herbal extracts
directly onto and around the heating coil. Be careful not to
dislodge the heating coil if your extracts are highly viscous.
The Dabbler will handle up to about 1/8" around (4mm).
If the extracts are not staying in place, push the button briefly
to melt them onto the coil.
Screw all parts of the Dabbler together and inhale lightly
while pushing the button. You may push up to 10 sec at a
time. After 10 seconds, the Dabbler will blink 8 times turning
off momentarily to protect the battery. After 2 seconds of rest
time the Dabbler is recovered and ready to use again.
Unscrew the Dabbler to visually inspect the ceramic bowl.
Apply more herbal extract as needed.
The number of puffs you get from one loading will depend on
the quantity and quality of herbal material, as well as the size
of the inhalation. Expect about 4-10 inhales before reloading.
Important notes to preserve your Dabbler in top shape:
Keep the charge topped off to maximize performance and
battery capacity.
Do not operate the Dabbler for extended times while there
is no herbal material on the heating coil.
Protect the Dabbler from shock, temperature extremes
and moisture.
The Dabbler's battery and heater may be damaged if used
with other vapor pens and such use voids the warranty.
Where to Get Replacement Parts:
Your heating element is an expendable item and needs to be
replaced periodically. It is convenient to have extras on hand
as backup and if you wish to travel.
Check with your local retailer to see if they carry spare parts.
Avoid using any other brands. Genuine Dabbler parts are
available online at www.vaporbrothers.com

Advertisement

loading

Summary of Contents for Vapor Brothers VAPE-PEN DABBLER

  • Page 1 Using your Dabbler: Before using your dabbler, screw the heater onto the battery. If you’re using your Dabbler for the first time, please Presents push and hold the button to familiarize yourself ® with the operation of the Dabbler and ensure it THE DABBLER BY VAPE-PEN works correctly. Congratulations for choosing the next generation Dabbler! This instruction manual should get you on your way to Note that the heating coil will stay on for 10 seconds at a time vaporizing in no time.
  • Page 2 Cleaning the Dabbler: Warnings & Disclaimers: This is an electronic instrument that is sensitive to water and This device has hot surfaces to evaporate the active ingredients and these surfaces should not be touched during moisture. Wipe the outside clean with a dry cloth. use.