B) Inserting The Rechargeable Battery - Renkforce 1298781 Operating Instructions Manual

• Close the rubber cover again.
To remove a memory slot, first switch off the surveillance camera.
Open the rubber cover, push the memory card down into the slot a little
e.g. with a finger nail.
Then the latching mechanics release the memory card and will push it
a little out of the slot. The memory card can then be removed easily.

b) Inserting the Rechargeable Battery

• Push the battery compartment lid down a little and take it off.
• Insert the enclosed LiIon battery so that the rechargeable battery's contacts
correspond to the respective contacts in the battery compartment.
• Put on the battery compartment lid again.
The scope of delivery includes two different battery compartment lids.
• Battery compartment lid with clip
• Battery compartment lid without clip
Depending on where the surveillance camera is to be operated/attached,
use one or the other battery compartment lid.
44