1. Manuals
  2. Brands
  3. Standart Horizont Manuals
  4. GPS
  5. CPN700i
  6. Owner's manual

Standart Horizont CPN700i Owner's Manual

Multimedia chart plotters
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CPN700i/CPN1010i
Multimedia Chart Plotters
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPN700i and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Standart Horizont CPN700i

Summary of Contents for Standart Horizont CPN700i

  • Page 1 CPN700i/CPN1010i Multimedia Chart Plotters Owner's Manual...
  • Page 2 Electronic charts displayed by the CPN Series Chart Plotter are believed to be accurate and reliable, but are not intended to be a substitute for the official charts, which should remain your main reference for all matters related to the execution of safe navigation. For this reason you should always keep the official published and approved nautical charts on board.

  • Page 3: Table Of Contents

    Chart Control Icon .................... 35 SETTINGS IN GENERAL SETUP MENU ..............36 CARTOGRAPHY OVERVIEW ....................37 BUILT-IN CHARTS --- AVAILABLE ONLY FOR USA ........... 37 Updating Built-In Charts ................... 38 C-MAP 4D ........................40 CPN700i and CPN1010i Multimedia Chart Plotters Page 5...
  • Page 4 C-MAP 4D: MAX Content ................41 C-MAP 4D: FULL 4D Content ................41 C-MAP 4D: Value Added Data ................ 42 VALUE ADDED DATA MENU ..................42 REMOVING A SD CARD ......................42 USING FIND SERVICES ......................43 PORT SERVICES ......................43 PORT ..........................
  • Page 5 NMEA Display Page ..................94 Customizing data box in the NMEA Display Page ........... 95 NMEA Data Page ..................... 95 FISH FINDER (optional FF525 required) ..............96 TIDE PAGE ........................96 Tides ........................ 96 CPN700i and CPN1010i Multimedia Chart Plotters Page 7...
  • Page 6 VHF DIGITAL SELECTIVE CALLING ................97 NMEA 0183 Interfacing ..................98 Distress Call ..................... 98 Position Request ....................98 DSC Directory ....................99 VIDEO INPUT ....................... 99 Video Input menu ..................... 99 Video adjustment mode ................. 100 Restore Defaults .................... 100 ADVANCED SETTINGS ......................
  • Page 7 PORT Output sentences ................142 CPN Series Chart Plotter to NMEA 0183 connection examples ....142 VIDEO INPUT CONNECTOR ..................144 VIDEO INPUT CONNECTIONS for CPN700i ............. 144 VIDEO INPUT/OUTPUT CONNECTIONS for CPN1010i ..........145 PRE-AMP OUTPUT - EXTERNAL AMPLIFIER/SPEAKER CONNECTIONS ..... 145 CPN Pre-Amp connector pin out ..............

  • Page 8: Introduction

    Global Positioning System (WAAS GPS) constellation of satellites. The internal or optional GPS antenna provides precise location data with a host of navigation features ideal for nautical use. The CPN700i and CPN1010i are housed in rugged, impact-resistant cases with outstanding ergonomic design for effortless operation. The CPN700i and CPN1010i are IP57 waterproof.

  • Page 9: Packing List

    Bracket knob S8003045 Dust cover (CPN700i) S8003042 Dust cover (CPN1010i) T9101553 PWR ACC1 & ACC2 cable S8003044 Flush Mount Bracket XUCMP0052 2 Amp fuse and holder EM052U100 Owner’s Manual EM052U500 Quick Reference Guide CPN700i and CPN1010i Multimedia Chart Plotters Page 11...

  • Page 10: Optional Accessories

    OPTIONAL ACCESSORIES Page 12 Owner’s Manual...

  • Page 11: General Operation

    GENERAL OPERATION MANUAL CONVENTIONS This Owner’s Manual includes information for both the 7inch CPN700i and 10inch CPN1010i Multimedia Chart Plotters which are referenced to CPN Series Chart Plotters throughout this manual. In addition when a word(s) is bold and underlined it is referring to a menu selection on the display.

  • Page 12: Brightness Control

    BRIGHTNESS CONTROL With the CPN Series Chart Plotter turned On, briefly press the PWR key to show the brightness control window. On the Brightness window, tap on to increase or to decrease the display backlight (or move the ShuttlePoint Knob to the right or left); when finished, tap on to save the selection and exit the brightness setting mode.

  • Page 13: Touchscreen

    TOUCHSCREEN The CPN700i and CPN1010i use a touchscreen display. Many functions are controlled by touching the display or using the dedicated keys, ShuttlePoint or Rotary Knobs. The Touchscreen Calibration can be started from the Start Up screen by pressing and holding the key for 5 seconds, or by pressing the Intelligent key from any screen other than Setup.

  • Page 14: Touchscreen Keys

    · Pointing and manipulating objects on the chart (cartographic and user objects) · Moving the cursor · Chart rotation, Panning, Tilting and Zooming When touching an active object on the screen, the system provides a visual feedback to the show object has been touched (for example the object changes its color when touched).

  • Page 15: Touchscreen Keyboard For Other Applications

    : list of all menu items present on the current menu level. There are two types of menu items: opens the next menu level. allows choosing one of available options. · : when touched up/down the bar, scrolls the content of the related window/page. See the following picture. CPN700i and CPN1010i Multimedia Chart Plotters Page 17...

  • Page 16: Warning Window

    Warning Window The Warning window will be shown to alert you of critical situations. For example: Tap on to close the Warning window. Information Window Above you can see an example of Information window that shows the CPN Series Chart Plotter is computing something.

  • Page 17: Chart Plotter Controls

    CHART PLOTTER CONTROLS KEYS The CPN700i and CPN1010i in addition to being able to control functions with the touch display, for your convenience dedicated keys and knobs are also provided. You will notice when a key is pressed a single beep will be produced which means the key press is valid.
  • Page 18 ACTIVE ONLY IN HART LOTTER MODE · When a Chart Page is selected, pressing the key places a Mark under the ship’s position when in Home Mode, or under the cursors position. · Pressing and holding for 3 seconds allows you to open the Marks/Wpt List page. ACTIVE ONLY IN HART LOTTER MODE...

  • Page 19: Playing Music In Background (For Chart Plotter Mode Only)

    1. While Chart Plotter Mode is running, press the Intelligent key. A pop-up window with the options Browser and Multimedia is shown. 2. Tap on Multimedia Icon . The Media Player is opened. CPN700i and CPN1010i Multimedia Chart Plotters Page 21...

  • Page 20: Stopping To Play

    3. Choose a song to play, adjust the play mode and volume (see Media Player section for more information). 4. Press the Intelligent key to go back to Chart Plotter Mode. The Media Player is hidden but it is active (music is playing) and the Chart Plotter Mode is shown again. Pressing the Intelligent key toggles between Media Player and Chart Plotter Modes.

  • Page 21: Closing Soft Keys

    7 seconds before inserting the new one. To remove an SD CARD with chart data during the CPN Series Chart Plotter working follow the procedure described in the Chart Plotter section. CPN700i and CPN1010i Multimedia Chart Plotters Page 23...

  • Page 22: Chart Plotter

    CHART PLOTTER GETTING STARTED This section takes you through the most frequently used operations and shows how to customize the appearance of the CPN Series Chart Plotter. 1. Press the PWR key until the display shows the Splash Screen page (see A). In case of error messages please refer to System Update Error Messages paragraph.

  • Page 23: Switching Between Modes

    ShuttlePoint Knob. Cursor Mode In Cursor Mode the Cross-Hair is shown on the chart. To exit this mode so the Boat Icon stays in the center of the chart press the key. CPN700i and CPN1010i Multimedia Chart Plotters Page 25...

  • Page 24: Switching Between 2D And 3D Modes

    Cursor Mode allows you to pan around and look at areas on the chart. In this mode you can also create Marks, Routes, measure distance and bearings from your current position. The CPN Series Chart Plotter will automatically exit from Cursor Mode to Home Mode if the display or a key is not pressed for a user selectable time.

  • Page 25: Menu System

    3. Tap on the small DUAL icon (see B) on the Desktop to show the Dual Chart page (see C). Setup Menu example 1. Press the key from any page. 2. Tap on the large Setup Menu icon (see A) to select a page. CPN700i and CPN1010i Multimedia Chart Plotters Page 27...

  • Page 26: Initial Setup

    3. Tap on the small GENERAL icon (see B) on the Desktop to show the General Setup page (see C). INITIAL SETUP Cursor and Menu selection speed The CPN Series Chart Plotter allows you to control the speed the Cursor moves on the chart and in menus using the ShuttlePoint Knob.

  • Page 27: Selecting Course Up/North Up

    There are three methods to change a page: From Main Menu 1. Press the key, the Main Menu appears. Tap on the desired Page icon (in the following example Navigation, see A), the related Desktop icons appears. CPN700i and CPN1010i Multimedia Chart Plotters Page 29...
  • Page 28 2. Tap on the desired Desktop icon (in the example above COMPASS, see B). The Compass page appears (see C). Sweep 1. Press and hold a finger on the display until a double arrow icon is shown (see A). 2. Without removing your finger, slide it to the left or to the right until the arrow turns white (see B), then remove your finger from the display to change to another page (see C and D).

  • Page 29: Assigning Page Soft Keys

    Daylight Saving and to configure the time in 12 or 24 hour formats. CPN700i and CPN1010i Multimedia Chart Plotters Page 31...
  • Page 30 1. Press the key, tap on Setup Menu. 2. Tap on GENERAL. The General Setup menu appears. 3. Tap on TIME SETUP. The Time Setup menu appears. 4. Tap on TIME ZONE. 5. Look at the table and find the time zone for your area. Tap under the bar (rotate the Rotary Knob or move the ShuttlePoint Knob) to select the desired zone and tap on it.

  • Page 31: Selecting Coordinate System

    Setup Menu. 2. Tap on GENERAL. The General Setup menu appears. 3. Tap on DISPLAY COLOR. A popup window will be shown with the available options Normal, Classic, NOAA, Night and Sunlight. CPN700i and CPN1010i Multimedia Chart Plotters Page 33...

  • Page 32: Selecting Language

    4. Tap on the desired selection. 5. Tap on to exit the menu and show the last selected page. In the pictures A and B you can see examples of charts and Compass page with the Display Color set to Normal. In the pictures C and D you can see the same examples with the Display Color set to Sunlight.

  • Page 33: Chart Control Icon

    Available only in 3D mode. Tap on the centre of the Chart Control Icon (see B) it is possible to select the desired icon among the available ones, see the table below: CPN700i and CPN1010i Multimedia Chart Plotters Page 35...

  • Page 34: Settings In General Setup Menu

    The default setting of the Chart Control Icon is Shown Permanent, however this may be changed by the procedure below: 1. Press the key, tap on Setup Menu. 2. Tap on GENERAL. The General Setup menu appears. 3. Turn the Rotary Knob until CHART CONTROL ICON is highlighted.

  • Page 35: Cartography Overview

    Caribbean, Cuba, Mexico, Puerto Rico, and Central America. Fresh water coverage is not included. Detailed coverage and Fresh waters charts are available from Jeppesen. · Depth contours and Spot Soundings to 66 Feet (20 meters) on lower scale charts and CPN700i and CPN1010i Multimedia Chart Plotters Page 37...

  • Page 36: Updating Built-In Charts

    33 Feet (10 meters) on higher scale charts. · Port Info: basic information for Marinas and the list of services symbols. · Selectable Tide Page showing Tidal information, moon and sun rise and set times. · All Nav-Aids with icon and description ·...
  • Page 37 6. The installation process begins. Pay attention: do not turn the CPN Series Chart Plotter Off during installation. The installation status appears in the two progress bars on the bottom of the package update window (see C): CPN700i and CPN1010i Multimedia Chart Plotters Page 39...

  • Page 38: C-Map 4D

    7. At the end of the installation process, the Start Up Screen is shown. 8. To complete the Built-In Charts update procedure, press the PWR key to turn the CPN Series Chart Plotter Off and remove the Chart Update Card from the slot. 9.

  • Page 39: C-Map 4D: Max Content

    Waypoints of the shortest Route; highlights potential hazards and displays varying levels of alerts for each segment of the route, allows you to manually adjust the route. CPN700i and CPN1010i Multimedia Chart Plotters Page 41...

  • Page 40: C-Map 4D: Value Added Data

    C-MAP 4D: Value Added Data New additional data or service to standard cartography available (High Resolution Bathym- etry, weather, etc). You can enable or disable the display of the category as a whole or of each individual. · High Resolution Bathy charts & Spot Soundings: Data Base with high resolution bathy information for an extraordinary view of the seabed depth.

  • Page 41: Using Find Services

    3. Tap on PORT SERVICES. A popup window will be shown with a list of different Port Services (see A). 4. Move the ShuttlePoint Knob or touch the screen to highlight the desired type of CPN700i and CPN1010i Multimedia Chart Plotters Page 43...

  • Page 42: Port

    service and tap on . Another popup window will appear displaying the distance and position of the Port Services closest to your location (see B). Otherwise tap on to exit. 5. Use the ShuttlePoint Knob to highlight the desired Port Service and tap on .

  • Page 43: Tide Stations

    Soft Key (see C). 3. Tap on the desired Tide Station in the menu (see D). 4. Tap on to show the new Tide information or tap on to exit the menu. CPN700i and CPN1010i Multimedia Chart Plotters Page 45...

  • Page 44: Wrecks

    WRECKS This feature is used to locate the 20 nearest Wrecks to the position of your vessel. A Wreck is represented with an icon on the chart, see the following table: 1. Press the key, tap on Chart. 2. Tap on FIND. The Find Services & More menu appears. 3.

  • Page 45: Lakes Informations

    ShuttlePoint Knob to highlight the desired Lake or tap on it. 6. Tap on to show the location of the Lake (see C). 7. Press the key 2 times to revert to your vessel’s position. CPN700i and CPN1010i Multimedia Chart Plotters Page 47...

  • Page 46: Quick And Full Info On Lakes

    QUICK AND FULL INFO ON LAKES Upon viewing the chart of a lake, you can tap on the Lake Info icon (see A) to query the available information immediately displayed with many details. When the cursor is placed over this icon (and the Auto Info option is allowed) the Quick Info window appears: the icons of the available services are shown (see B).

  • Page 47: Points Of Interest

    2 times to revert to your vessel’s position. USER POINTS This feature is used to search for User Points (Marks and Waypoints you have created and stored) by name quickly and efficiently. CPN700i and CPN1010i Multimedia Chart Plotters Page 49...

  • Page 48: Coordinates

    1. Press the key, tap on Chart. 2. Tap on FIND. The Find Services & More menu appears. 3. Tap on USER POINTS. The touchscreen keyboard appears, it will allow you to enter in the name of the User Point you wish to locate. Insert the desired name; when finished tap on , the keyboard disappears.

  • Page 49: Chart Display Functions

    4. Once the window is selected the options can be set for that chart. Tap on to exit from menu. Display Mode This function allows to toggle among the (default) 2D (see A) and 3D (see B) modes to display the chart on the screen: CPN700i and CPN1010i Multimedia Chart Plotters Page 51...

  • Page 50: Overlay

    To activate this function follow the procedure: 1. Press the key, tap on Setup Menu. 2. Tap on DISPLAY. The Chart Display menu appears. 3. Tapping on DISPLAY MODE selects between 2D or 3D. 4. When the item you want has been selected, tap on to exit from menu.

  • Page 51: Transparency

    2. Tap on DISPLAY. The Chart Display menu appears. 3. Tapping on ICONS SIZE selects between Standard or Large. 4. When the item you want has been selected, tap on to exit from menu. CPN700i and CPN1010i Multimedia Chart Plotters Page 53...

  • Page 52: Place Name Size

    Place Name Size It is possible to set the size of all names drawn on the charts, selecting between default Standard (see A), Medium (see B) and Large (see C) size. To activate this function follow the procedure: 1. Press the key, tap on Setup Menu.

  • Page 53: Currents Prediction

    This feature only operates in areas where tidal buoys are present and when the CPN Series Chart Plotter has a GPS fix. Tidal stream arrows are shown on the charts, indicating the direction and strength of the Tide: CPN700i and CPN1010i Multimedia Chart Plotters Page 55...

  • Page 54: Chart Language

    The color of the arrow denotes the strength of the current as follows: When the CPN Series Chart Plotter receives a valid position fix, the Tide icons are shown on the charts on the basis of the current date and time: the screen displays and changes arrows as date/time changes.

  • Page 55: Nav-Aids Presentation

    It is a line projected from the ship icon which indicates the distance your vessel will travel at the current speed. Selections are 2, 10 (default), 30 minutes, 1, 2 hours and Infinite. CPN700i and CPN1010i Multimedia Chart Plotters Page 57...

  • Page 56: Compass Indicator

    To activate this function follow the procedure: 1. Press the key, tap on Setup Menu. 2. Tap on DISPLAY. The Chart Display menu appears. 3. Turn the Rotary Knob to select COURSE TIME LINE. 4. Tap on COURSE TIME LINE. 5.

  • Page 57: How To Show The Pictures Or Diagrams Of A Object

    When the picture is shown, tapping on it shows the associated Soft Keys. If there are more pictures to show, there will be the and/or Soft Keys. Tap on the Soft Key to exit, otherwise tapping on the Soft Keys disappear. CPN700i and CPN1010i Multimedia Chart Plotters Page 59...

  • Page 58: Creating Marks

    CREATING MARKS A User Point is an object that you can place on the charts to mark a specific point. The CPN Series Chart Plotter features two types of User Points: Marks and Waypoints. · Mark can be a stand alone position or be linked to a Route. A Mark is place on the Chart Page using the key or by entering in information in the Marks/Waypoints List page and tapping on...

  • Page 59: Deleting A Mark Or Waypoint

    ShuttlePoint Knob to move the cursor. A dotted line, connecting the previous Mark or Waypoint position to the new position, is shown (see B). 4. Tap on the new position (the key to abort the move), the Mark or Waypoint appears (see C). CPN700i and CPN1010i Multimedia Chart Plotters Page 61...

  • Page 60: Marks/Waypoints (User Points) List

    There is also an easier way to start moving a Mark or Waypoint: press the or the key while cursor is over a Mark point or a Waypoint. Then tap on the desired position and press the ShuttlePoint Knob. If the CPN Series Chart Plotter was in 3D mode, it will automatically change to 2D mode and remain there after the change has been made.

  • Page 61: Creating/Modify A New Mark In The User Points List

    Rotary Knob to the right to select the Latitude/Longitude field and press the Rotary Knob. Again the touchscreen keyboard appears. Insert the desired coordi- nates; when finished tap on , the keyboard disappears. CPN700i and CPN1010i Multimedia Chart Plotters Page 63...

  • Page 62: Routes

    9. Turn the Rotary Knob to the right to select the Mode field and press the Rotary Knob. It is possible to use the ShuttlePoint Knob in place of the Rotary Knob. Make sure that the SHUTTLEPOINT ENTER item (in “Settings in General Setup Menu” paragraph, “Chart Plotter” section) is set to On, so pressing the ShuttlePoint Knob in the center is equal to confirm action.

  • Page 63: Creating A Route Using Waypoints

    ShuttlePoint Knob or touch the screen on the Route (on Waypoint or on leg). For example if you touch on Waypoint this screen appears: 2. Tap on the Soft Key. The Edit Route page appears: CPN700i and CPN1010i Multimedia Chart Plotters Page 65...

  • Page 64: Creating An Olympic Route Or Boundary

    3. Tap on . The touchscreen keyboard appears. Insert the desired Route name; when finished tap on , the keyboard disappears. 4. Press the key to show the Chart Page. CREATING AN OLYMPIC ROUTE OR BOUNDARY This feature allows the starting point in a Route to be saved as the final destination point. 1.

  • Page 65: Creating A Route Using Marks On The Chart Page

    You can touch the Mark on the display instead of using the ShuttlePoint Knob. INSERTING A WAYPOINT INTO A ROUTE 1. Touch or move the ShuttlePoint Knob to the navigation line between two Waypoints and tap on the Soft Key (see A). CPN700i and CPN1010i Multimedia Chart Plotters Page 67...

  • Page 66: Deleting A Route

    2. The line between the two Waypoints is turned into a dotted line. 3. Move the ShuttlePoint Knob or touch the display in the desired location for the new Waypoint: the line will “rubber-band”, drawing a dotted line between the previous Waypoint and the cursor, and another dotted line between the cursor and the next Waypoint (see B).
  • Page 67 Production Installation and Wrecks) are above this depth level. Only if the depth attribute is above the depth limit are they found and considered as dangerous. See the picture below. The default setting is 10FT. CPN700i and CPN1010i Multimedia Chart Plotters Page 69...

  • Page 68: Easy Routing (Er)

    ACCURACY Defines a segment length into which a leg of the Route is divided in order to execute the search for dangerous objects with better accuracy. When accuracy is maximal, a segment length is the shortest. When accuracy is minimal, a segment length is the longest.
  • Page 69 Select Route window appears, to select a Route in which the calculated ER Route will be saved (see B). Start and End points can be defined not only under the current cursor position but also on a chosen User Point or geographical position or Port Service/POI. CPN700i and CPN1010i Multimedia Chart Plotters Page 71...

  • Page 70: Warning Messages

    5. Select the desired row by turning the Rotary Knob to left/right or touching the scroll bar up/down and tap on it (otherwise tap on to close the window and abort the Easy Routing function). The Chart Page appears. 6. Anywhere on the Chart Page move the ShuttlePoint Knob or tap on the display to select the starting point, (see C) and then tap on the Soft Key, to define...

  • Page 71: Goto Key Operation

    The CPN Series Chart Plotter can easily be set to start navigating to the Cursor on the Chart Page, a saved Mark or a Route that was created. GOTO CURSOR 1. Tap or move the ShuttlePoint Knob to the exact position on the chart you want to CPN700i and CPN1010i Multimedia Chart Plotters Page 73...

  • Page 72: Goto A Route

    navigate to. 2. Press the key and a GOTO popup window will be shown (see A). If an Easy Routing has been creating, there is ER item too. 3. Tap on CURSOR. 4. The CPN Series Chart Plotter is now navigating from your current position to the location selected at step 1.

  • Page 73: Using The Shuttlepoint Knob

    Route simply by touching the display or moving the cursor using the ShuttlePoint Knob or tapping on the display to a location or on the top of a Mark or Waypoint on the chart and pressing the key. CPN700i and CPN1010i Multimedia Chart Plotters Page 75...

  • Page 74: Man Over Board (Mob) Function

    MAN OVER BOARD (MOB) FUNCTION During navigation, the “MOB” feature provides a one-touch method of storing a location, such as a point were a crew member fell overboard. In this mode, the CPN Series Chart Plotter places a MOB point on the Chart Page and all the navigation data shown is related to navigating back to this point, allowing you to retrace your path to the MOB point efficiently.

  • Page 75: Tracks

    If you move the cursor over the top of the circle a popup window will be shown with the Time, Water Temperature, Speed and Course Over Ground (COG). This is very useful if you are fishing and want to review the conditions where the fish were being caught. CPN700i and CPN1010i Multimedia Chart Plotters Page 77...

  • Page 76: Saving And Starting A New Track

    SAVING AND STARTING A NEW TRACK A Track can be saved and retained in memory when the power is turned off. To start a new Track: 1. Press the key, tap on User Points. 2. Tap on TRACK. 3. Tap on ACTIVE TRACK. 4.

  • Page 77: Setup / Reset

    PC. The SD CARD is useful to backup User Points when the RAM has to be cleared to resolve an issue or load new software, or if you would like to transfer Waypoint, Track and Route information from one STANDARD HORIZON CPN Series Chart Plotter to CPN700i and CPN1010i Multimedia Chart Plotters Page 79...

  • Page 78: Formatting The Sd Card

    another. The information shown below will assist you to transfer the User Points, Routes and Track history to the SD CARD. FORMATTING THE SD CARD If there is a C-MAP 4D CARD inserted into the slot, before formatting procedure, please safely remove it using the following steps: 1.

  • Page 79: Loading A File From The Sd Card

    4. Open the door, remove the SD CARD from the slot and insert another SD CARD into the same slot. 5. Tap on the Soft Key. This "new" SD CARD is now ready to receive and store information. CPN700i and CPN1010i Multimedia Chart Plotters Page 81...

  • Page 80: Main Menu

    MAIN MENU The Main Menu allows quick and easy Page Selection and setup of CPN Series Chart Plotter. Press the key from any page to show the Main Menu. This display consists of two parts: · the page selection area with the Page Icons .

  • Page 81: Customizing A Page Icon

    Chart. In the bottom of the page the available icons appear: SINGLE opens the Chart Page, DUAL opens the Dual Chart Page, & HIGHWAY opens the Chart/Highway Page and FIND opens the Find Services & More menu. CPN700i and CPN1010i Multimedia Chart Plotters Page 83...

  • Page 82: Single

    For & HIGHWAY please see “Chart/Highway” in the “Navigation Pages” section, and for FIND see “Using Find Services” section. Single To show a single chart, follow the procedure below: 1. Press the key, tap on Chart. 2. Tap on SINGLE. Dual Selecting this page will show two chart windows, both of which the chart may be independently setup:...

  • Page 83: Customizing Data Windows

    - - -, unless the CPN Series Chart Plotter is navigating to a point. When in Cursor Mode, the BRG shows the Bearing from the ship’s position to the cursor location. CPN700i and CPN1010i Multimedia Chart Plotters Page 85...

  • Page 84: Collapsing Data Windows

    Chart Scale is available only for chart pages (1 Line Small, 2 Lines Small, 1 Line Large) and is always displayed in the General Chart window (it is not customizable there). Available only on the Highway Page/Chart Page 1 Line Large. To select the desired field, follow the procedure: 1.

  • Page 85: Additional Functions On Chart Page: Information On Objects

    (see A), or only On Points (see B) or to turn this function Off, in this case no popup window is shown when the cursor in placed on a cartographic object (see C). The default setting is On Points. CPN700i and CPN1010i Multimedia Chart Plotters Page 87...

  • Page 86: Display Mode

    To select the information displayed on Objects follow the procedure: 1. Press the key, tap on Setup Menu. 2. Tap on GENERAL. 3. Turn the Rotary Knob to select AUTO INFO and tap on it. 4. Tap on Off, On Points or On All. 5.

  • Page 87: Marine Settings

    (see Safe Depth option). This shading mode is very important to identify the map region where the deepness is greater than a specified value and for this reason the shipping can be considered safe. CPN700i and CPN1010i Multimedia Chart Plotters Page 89...

  • Page 88: Chart Settings

    Safe Depth : In Safe mode, it’s necessary to set the value for the Safe Depth to identify safe and unsafe area. If this value isn’t set, all depth areas appear with the same color. Sets the value in the range 0 - 1000Ft.

  • Page 89: Underwater Objects Settings

    HIGHWAY opens the Highway Page, COMPASS opens the Compass Page and GPS opens the GPS Status Page. Highway Page Shows a 3D Highway view of the vessel travelling through the water only when navigating CPN700i and CPN1010i Multimedia Chart Plotters Page 91...

  • Page 90: Chart/Highway Page

    to a destination point, Mark or following a Route. 1. Press the key, tap on Navigation. Tap on HIGHWAY. The Highway Page appears. Data Boxes on the Highway Page can be customized, except for GPS Status (see in the following picture). In the bottom left corner of the Highway page there is a small gray window (see the following picture) which shows the Scale (width) of the Highway.

  • Page 91: Gps Status Page

    : Allows setting the Navigation Speed (SOG update) among Low and High. The default setting is High. Speed Filter : Allows to resolve erratic speed readings in rough seas. Available values are Off, Low, Medium, High. The default setting is Off. CPN700i and CPN1010i Multimedia Chart Plotters Page 93...

  • Page 92: Waas/Egnos Setting

    Diff Correction Source : Allows setting what kind of Differential Correction will be used by the GPS between WAAS/EGNOS and None. The default setting is WAAS/EGNOS. 2. Tap on the preferred item. 3. Press the key to exit the menu. * The GPS Setup menu changes depending if the internal or external GPS is detected and switched on, and also can be different depending on the type of the external GPS used.

  • Page 93: Customizing Data Box In The Nmea Display Page

    1. Connect the BLUE Wire on the to the junction of the Brown wire and the VHF wire. 2. Press the key, tap on NMEA. 3. Tap on DATA. The display should look similar to the following picture. CPN700i and CPN1010i Multimedia Chart Plotters Page 95...

  • Page 94: Fish Finder (Optional Ff525 Required)

    4. To freeze the data on the display so it is easy to read and understand, press the ShuttlePoint Knob or the Rotary Knob. 5. To unfreeze the data, the ShuttlePoint Knob must be pressed again. 6. View data from a device connected to another data port, tap anywhere on this page for the Soft Keys to appear, and then tap on the Soft Key: an option window with available ports will appear.

  • Page 95: Vhf Digital Selective Calling

    1. a vessel that has transmitted a DSC Distress call 2. a vessel that has transmitted a DSC Position Send Call 3. The position of a vessel that transmitted a DSC Position Request Call CPN700i and CPN1010i Multimedia Chart Plotters Page 97...

  • Page 96: Nmea 0183 Interfacing

    NMEA 0183 Interfacing To take advantage of these functions the CPN Series Chart Plotter must be interfaced (wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Connections section for connection example. Distress Call CPN Series Chart Plotters are able to display the location of a vessel in distress when interfaced to a compatible DSC VHF with NMEA 0183 output and the radio receives a DSC Distress Call.

  • Page 97: Dsc Directory

    Setup Menu. 2. Turn the Rotary Knob or tap on the right bottom arrow to scroll the Desktop Icons to display VIDEO and tap on it. The Video Input menu appears. CPN700i and CPN1010i Multimedia Chart Plotters Page 99...

  • Page 98: Video Adjustment Mode

    1. Press the key, tap on Page Icon Video Input. 2. Select the video image type: for CPN700i tap on VIEW1 or PIP1, for CPN1010i tap on VIEW1, VIEW2, PIP1 or PIP2 as you want. After video image type has been selected, the CPN Series Chart Plotter will show a Warning...

  • Page 99: Advanced Settings

    Normally the user does not enter a ASF value. However for experienced users this function allows entering of signal delay values to fine adjust the calculated position. The user should enter delay values to fine adjust the position calculated. CPN700i and CPN1010i Multimedia Chart Plotters Page 101...

  • Page 100: Compass (Cog) Setup

    Alter: Alternate Solution Parameter selected by the user that is applied in the conversion of geographical coordinates Lat/Lon to TD values. To be used if the position displayed is roughly not correct. COMPASS (COG) SETUP The CPN Series Chart Plotter computes compass direction from the constellation of GPS Satellites.

  • Page 101: Nmea 0183 Output Sentences

    Once the alarm condition is no longer present, the relative tick marker is removed. CPN700i and CPN1010i Multimedia Chart Plotters Page 103...

  • Page 102: Simulation

    The Grounding Alarm function checks the objects that belong to the standard charts. It does not check the objects belong to the VAD categories. The Grounding Alarm function is available only if a C-MAP 4D SD CARD is inserted. It also affects the screen redraw speed so we suggest to disable it when not used.

  • Page 103: Dsc Polling

    Soft Key saves the Built-In Chart to a optional SD CARD for updating purposes. · the Soft Key opens the Data Access Manager Report Page · the Soft Key starts the Safety Remove Data Cartridge procedure. CPN700i and CPN1010i Multimedia Chart Plotters Page 105...

  • Page 104: Dam Report Page

    In the picture above UNIT ID code is ONLY FOR USA. 4. Press the key to close the About Page. DAM Report Page The DAM (Data Access Manager Report for Optional 4D cartography) Report Page contains details about the Subscription, Expiration Date and Data/Features Segmentation status of the C-MAP 4D data cartridge.

  • Page 105: Ais

    · Name: name of ship, 20 characters. · MMSI (Maritime Mobile Service Identity) number: a unique 9 digit number that is assigned to a DSC radio station. It primarily registers the boat information in the U.S. CPN700i and CPN1010i Multimedia Chart Plotters Page 107...

  • Page 106: Menu

    Coast Guard’s national distress database for use in emergency situations. · Active Target: Target located within the Activation Range. Active target is represented by oriented triangle with COG and Heading vectors. Rate of turn may also be displayed. · Dangerous Target: Target detected by CPA or TCPA Alarm. Dangerous target is Active Target by definition.

  • Page 107: List

    AIS TARGET COLORS The received AIS Targets are shown in color. The color depicts the type of AIS ship shown on the Chart Page. Refer to following table. CPN700i and CPN1010i Multimedia Chart Plotters Page 109...
  • Page 108 Page 110 Owner’s Manual...

  • Page 109: Connection Manager

    Start Up screen. From the Start Up Page 1. Turn on the CPN Series Chart Plotter. 2. When the Start Up display is shown, tap on the Connect Icon (see A). CPN700i and CPN1010i Multimedia Chart Plotters Page 111...

  • Page 110: Connection Manager Overview

    CONNECTION MANAGER OVERVIEW The first time the Connection Manager is opened, the following window is displayed: Wi-Fi® CONNECTION The Wi-Fi® tab lists the available Hotspots found by the CPN Series Chart Plotter (see the picture below) and allows connection to a desired Hotspot. Page 112 Owner’s Manual...

  • Page 111: Connection Manager Controls

    Hotspot. If the latest selected Hotspot is no longer available or if it has a weak signal, the Connection Manager tries to connect to the Hotspot with the strongest signal. CPN700i and CPN1010i Multimedia Chart Plotters Page 113...

  • Page 112: Authentication/Encryption Protocols

    The Connection Manager will show the parameters of the selected Hotspot. To change an item tap on a area next to it and a touchscreen keyboard will appear to insert text into the selected field. When finished, tap on to close the touchscreen keyboard. Not all Hotspots parameters are correctly detected.

  • Page 113: Networking Connection: C-Map 4D Charts,Nmea & Fish Finder Data Sharing

    1. Connect the Ethernet Crossover Cable between the two CPN Series Chart Plotters. Refer to the images below to identify the Ethernet port on your CPN Series Chart Plotter: 2. Press and hold the PWR key to turn on both Chart Plotters. CPN700i and CPN1010i Multimedia Chart Plotters Page 115...

  • Page 114: Chart Plotter 1 Setup (With C-Map 4D Card Inserted)

    Chart Plotter 1 Setup (with C-MAP 4D CARD inserted) 1. When the Start Up page is shown, tap on the Connect Icon (see A). 2. The next display shown is the Connection Manager (see B), tap on the Data Sharing tab: 3.
  • Page 115 Plotter is restarted. In this case to restart the Chart Plotter, follow the procedure below: 1. Press and hold the PWR key until the display shows the Shut Down window: 2. Tap on to turn off the CPN Series Chart Plotter. CPN700i and CPN1010i Multimedia Chart Plotters Page 117...

  • Page 116: Chart Plotter 2 Setup (No Chart Inserted)

    Chart Plotter 2 Setup (no chart inserted) 1. When the Start Up page is shown, tap on the Connect Icon (see F). 2. The next display shown is the Connection Manager (see G), tap on the Data Sharing tab: 3. Check that Vector Chart Sharing (see H) is disabled (otherwise if both CPN Series Chart Plotters are configured with the Vector Chart Sharing option enabled, vector charts will not be shared):...
  • Page 117 9. Tap on the Plotter Icon and confirm the C-MAP 4D charts are shown on Chart Plotter 2. Open the About Page on both CPN Series Chart Plotters and verify that the CPN700i and CPN1010i Multimedia Chart Plotters Page 119...

  • Page 118: Custom Setup

    Chart Plotter 1, where the C-MAP 4D CARD is inserted, displays the Chart Code in field “Local SD Chart” and that the same Chart Code is displayed in the Chart Plotter 2 in the “Remote SD Chart” field. To display the About Page: 1.

  • Page 119: Internet Browser

    Start Up screen. From the Start Up Page 1. Turn on the CPN Series Chart Plotter. 2. When the Start Up display is shown, tap on the Browser Icon (see A). CPN700i and CPN1010i Multimedia Chart Plotters Page 121...

  • Page 120: Browser Overview

    Internet Navigation from the Chart Plotter While in Chart Plotter Mode press the Intelligent key. Tap on Browser Icon to open the Browser application. Tap on to close the Browser and go back to the Start Up Screen. BROWSER OVERVIEW The Browser Home page is displayed when the Browser is launched (see B).

  • Page 121: Internet Browser Controls

    INTERNET BROWSER CONTROLS CPN700i and CPN1010i Multimedia Chart Plotters Page 123...

  • Page 122: How To Navigate

    HOW TO NAVIGATE At this point you can start the Internet navigation by typing the desired URL (web site address) in the address line. A touchscreen keyboard appears to allow the insertion of the address: when finished tap on , the keyboard disappears. Tapping on places the keyboard on the bottom and top side of the screen.

  • Page 123: The Signal Indicator Icon

    Tap on the Soft Key to save the change and close. · tap on the Soft Key to exit. · to access the browser History list, tap on History (see C): CPN700i and CPN1010i Multimedia Chart Plotters Page 125...

  • Page 124: The Download Manager

    You can recall a page tapping on it from the list or clear the history by tapping on the Soft Key (see D). DOWNLOAD MANAGER This section will show how to download files form a web site. The CPN Series Chart Plotters are capable of downloading the following files.
  • Page 125 When this happens an “!“ icon will appear on the bottom of the page (see A). Tap on to display the Download Manager page where a warning message is displayed (see B). CPN700i and CPN1010i Multimedia Chart Plotters Page 127...
  • Page 126 To go on, it is necessary to delete a file, by using the Delete icon which allows file removing. If you tap on the Delete icon, two Soft Keys are shown (see C), to confirm deletion or not. After file deletion, tap on the Resume icon, to start the downloading again.

  • Page 127: Media Player

    From the Chart Plotter Mode 1. Press and hold the PWR key. The display shows the window below: 2. Tap on to display the Start Up screen. CPN700i and CPN1010i Multimedia Chart Plotters Page 129...

  • Page 128: Media Player Controls

    From the Start Up Page 1. Turn on the CPN Series Chart Plotter. 2. When the Start Up display is shown, tap on the Multimedia Icon (see A). Simultaneous Multimedia Music and Chart Plotter While in Chart Plotter Mode press the Intelligent key.
  • Page 129 CPN700i and CPN1010i Multimedia Chart Plotters Page 131...

  • Page 130: Saving Files On A Usb Thumb Drive

    SAVING FILES ON A USB THUMB DRIVE The example below refers to a PC with Windows XP Operating System. Other versions of Windows may be slightly different. 1. Connect a USB Thumb Drive to a PC which you have stored videos, images and music files on.
  • Page 131 2. Tap on the USB device icon to see the folders saved on the device (see B): 3. Tap on the folder to be viewed (example Music), see C: 4. Tap on the Multimedia file to play (see D): The selected multimedia file will automatically begin to play. CPN700i and CPN1010i Multimedia Chart Plotters Page 133...

  • Page 132: Installation

    INSTALLATION MOUNTING THE CPN SERIES CHART PLOTTER The CPN Series Chart Plotters are supplied with a swivel mounting bracket which allows them to be dash mounted. When flush mounting, the optional GPS Antenna may be needed to receive GPS satellite signals. Refer to the images below for bracket installation: When choosing a location to bracket mount a CPN Series Chart Plotter it is advisable to temporarily connect the plotter to power, enter Chart Plotter mode and check the signal strengths by touching on the Navigation icon, and touching the GPS Status icon.

  • Page 133: Flush Mounting The Cpn Series Chart Plotter

    FLUSH MOUNTING THE CPN SERIES CHART PLOTTER The CPN Series Chart Plotters are supplied with a flush mount cutout template and a flush mount kit. Refer to the images below as a guide to installing. CPN700i and CPN1010i Multimedia Chart Plotters Page 135...
  • Page 134 Before drilling holes make sure there is enough room to mount the CPN Series Chart Plotter and there are no obstructions. 1. After a location is found, peel the template label from the backing and apply the label to the mounting area. 2.

  • Page 135: Mounting The Optional External Gps Antenna

    4. Insert the cable into the 0.78” (20mm) hole and route to the CPN Series Chart Plotter. 5. Apply a small amount or RTV to the underside of the antenna and place onto mounting surface. Allow time for the antenna to adhere to the mounting surface. CPN700i and CPN1010i Multimedia Chart Plotters Page 137...

  • Page 136: Connections

    CONNECTIONS OVERVIEW The CPN Series Chart Plotter has connectors that allow it to be connected to: · Battery Connections · NMEA 0183 Devices (VHFs, AIS Receiver, Digital Instruments and Autopilots) · Optional FF525 BLACK BOX FISH FINDER · Optional Video Camera ·...

  • Page 137: Battery Connections

    4. This cable has many wires, however only the RED and BLACK wires are used to connect to a switched battery supply. Refer to the following images. For additional connections refer to NMEA 0183 Connections section. CPN700i and CPN1010i Multimedia Chart Plotters Page 139...

  • Page 138: Nmea 0183 Connections

    NMEA 0183 CONNECTIONS The CPN Series Chart Plotter are supplied with two accessory cables. These two cables may be connected to PWR/ACC1 or ACC2 connections. Page 140 Owner’s Manual...

  • Page 139: Pwr/Acc1 Connections

    - select when optional FF525 is connected (Port 2 default set to Fish Finder). · AIS 38400 - select when AIS receive or transponder is connected to an input · Disabled - disables the Port CPN700i and CPN1010i Multimedia Chart Plotters Page 141...

  • Page 140: Port Output Sentences

    Not available for ACC2. To change a selection follow the procedure below: 1. Press the key, tap on Setup Menu. 2. Tap on ADVANCED. 3. Tap on IN/OUT Connections. 4. Tap on the Port Input to be changed, than tap on the desired input. 5.
  • Page 141 CPN700i and CPN1010i Multimedia Chart Plotters Page 143...

  • Page 142: Video Input Connector

    Video Signal Ground of DVD/VCR/Video Cameras Video Signal+ Connect to Video Signal+ (NTSC/PAL) of DVD/VCR/Video Cameras VIDEO INPUT CONNECTIONS FOR CPN700i The CPN700i has: · 1 NTSC or PAL Compatible Input: NTSC or PAL video input allows a camera, DVD or VCR to be connected.

  • Page 143: Video Input/Output Connections For Cpn1010I

    The CPN Series Chart Plotter have a Pre-Amp Output designed to connect to an External Amplifier. To connect an External Amplifier to the Pre-Amp Output an optional ACAC10 adapter cable will have to be purchased separately. The following is an example of connections: CPN700i and CPN1010i Multimedia Chart Plotters Page 145...

  • Page 144: Cpn Pre-Amp Connector Pin Out

    CPN Pre-Amp connector pin out CPN700i/CPN1010i LINE Output Connector Description Channel right + Channel right - (GND) Channel left + Channel left - (GND) OPTIONAL USB THUMB DRIVE A USB thumb drive may be connected or removed from a CPN Series Chart Plotter rear panel connector at any time.

  • Page 145: Optional External Alarm Connection

    OPTIONAL EXTERNAL ALARM CONNECTION OPTIONAL GPS ANTENNA Refer to Optional WAAS GPS Receiver section. OPTIONAL FF525 BLACK BOX FISH FINDER Refer to Optional FF525 FISH FINDER section. CPN700i and CPN1010i Multimedia Chart Plotters Page 147...

  • Page 146: Second Cpn To Share C-Map 4D Charts, Nmea & Ff Data

    Standard Horizon will be releasing software updates the CPN Series Chart Plotters which will allow connection of NMEA 2000 devices and Ethernet Radar. Check with your dealer or visit www.standardhorizon.com in the CPN700i or CPN1010i sections for updates. Page 148...

  • Page 147: Specifications

    : one port, up to 100 Mbps. LAN support. Video Input : 1 input, NTSC or PAL Line Out : 4VRMS (max) at 20K 0HM Wi-Fi® Antenna : 802.11b/g/n external SMA connector CPN700i and CPN1010i Multimedia Chart Plotters Page 149...

  • Page 148: Dimensions

    DIMENSIONS CPN1010i Power Supply : 12-24 VDC Power Consumption : 19W max Current Draw: 1.6A@12VDC Display : 10” Wide SVGA Resolution: 1024 x 600 Sunlight viewable Backlight: LED (1000nits) Touch screen: Capacitive Cartography : C-MAP 4D SD CARD Operating temperature range : 32°F/+131°F (0°C/+55°C) Storage temperature : -4°F/+158°F (-20°C/+70°C) Keyboard...

  • Page 149: Dimensions

    Video Input : 2 inputs, NTSC or PAL Video Output : 1 output, VGA signals, 1024x600 resolution Line Out : 4VRMS (max) at 20K 0HM Wi-Fi® Antenna : 802.11b/g/n external SMA connector DIMENSIONS CPN700i and CPN1010i Multimedia Chart Plotters Page 151...

  • Page 150: Optional Ff525 Fish Finder

    OPTIONAL FF525 FISH FINDER Power Output : 600W or 1kW depending on connected transducer Frequency : 50 and 200kHz Minimum Depth : 5Feet at 50kHz, 2.5Feet at 200kHz Maximum Depth : 1500Feet at 50kHz, 700Feet at 200kHz Airmar X-DUCER ID : Must use Standard Horizon transducers part numbers Advanced Digital Signal Processing Speed &...

  • Page 151: Optional Waas Gps Receiver

    15 meter 8x28AWG cable with 6 pins female connector Electrical Characteristics Input Voltage 10 VDC to 35 VDC unregulated Input Current 0.8 Wmax GPS Receiver Sensitivity Tracking, Navigation :-160 dBm Acquisition, Reacquisition :-160 dBm Cold Starts :-145 dBm CPN700i and CPN1010i Multimedia Chart Plotters Page 153...

  • Page 152: Gps Connection Image

    GPS Performance GNSS Systems : L1 C/A GALILEO : L1 SBAS : WAAS (North America), EGNOS (Europe), MSAS (Asia), GAGAN (Indian) Geodetic Datum WGS84 Channels 32 + 18 Acquisition Time Reacquisition < 1 second Hot Start 1 second Warm Start 29 seconds Cold Start 29 seconds...

  • Page 153: Technical Tests

    (Input Data Format, Autopilot selection, etc.) to original default values. To confirm clear RAM press the ShuttlePoint Knob (but if at this time you do not wish to clear RAM press the key). CPN700i and CPN1010i Multimedia Chart Plotters Page 155...

  • Page 154: Backlight

    BACKLIGHT Each time you move the ShuttlePoint Knob to left, the screen will decrease brightness, move it to the right to increase brightness. CARTRIDGES (USED BY STANDARD HORIZON TECHNICIANS) Internal Data Base Test To test the Worldwide Background. SD CARD Test To test the SD CARD.

  • Page 155: System Update

    SD CARD. This operation might require several minutes (if you want to abort the installation tap on At the end of the checking, the package update window shows the following data (see B): CPN700i and CPN1010i Multimedia Chart Plotters Page 157...

  • Page 156: System Update Error Messages

    touchscreen key is now selected (it appears with blue frame). 7. Tap on to start installation (or tap on to abort). Otherwise move the ShuttlePoint Knob to place cursor on (or on to abort) and then press the ShuttlePoint or Rotary Knob.

  • Page 157: Error Message 08

    The Operating System is not installed in the CPN Series Chart Plotter and the inserted SD CARD does not contain a valid Installation Package · Error 22 - OS Image Corrupted: System Halted The Operating System in the CPN Series Chart Plotter is corrupted CPN700i and CPN1010i Multimedia Chart Plotters Page 159...
  • Page 158 It might occur when the Operating System gets corrupted (for any reasons regardless of installation procedure). If one of these messages appears, press the PWR key to turn Off the CPN Series Chart Plotter and then follow the procedure: 1. Download the Installation Package and install it on the SD CARD (or contact your dealer to obtain the proper Installation Package).

  • Page 159: Terms

    HEIGHT – The current Tide Height referred to the vertical cursor. HIGH WATER – The maximum level of the tide height in 24 hours. LOW WATER – The minimum level of the tide height in 24 hours. CPN700i and CPN1010i Multimedia Chart Plotters Page 161...
  • Page 160 PINGO – It is a mound of earth-covered ice found in the Arctic and subarctic that can reach up to 70 metres (230FT) in Height and up to 600 metres (2.000 FT) in diameter. Position Request – Marine DSC VHF Function of transmitting a GPS position to another Marine DSC VHF.
  • Page 161 Each wireless network device authenticates with the access point using the same 256-bit key. XTE (Cross Track Error) – The distance your vessel is off course (left or right) to a Destination point. CPN700i and CPN1010i Multimedia Chart Plotters Page 163...

  • Page 162: Analytical Index

    ANALYTICAL INDEX AUTO INFO ............37, 88 & HIGHWAY ..........83, 84, 92 Auto Info ..............105 1 Line Large ..........37, 86, 87 Auto Position ............. 105 1 Line Small ........... 37, 86, 87 AUTOMATIC CHECK ..........69 1 Line Small/Large ............85 Automatic Identification System ........
  • Page 163 Cross Track Error ..........85, 162 DISPLAY ...... 51, 52, 53, 54, 56, 57, 58, 94 Cuba ..............10, 37 Display ..........10, 108, 148, 149 Current Date ..............85 DISPLAY COLOR ............36 CPN700i and CPN1010i Multimedia Chart Plotters Page 165...
  • Page 164 Display Color ............... 33 external device ............. 63, 95 Display Mode ............... 51 DISTANCE ..............78 FA ................161 Distance ..........25, 36, 37, 160 Fathom ............... 161 Distance (DST) ............74 FAVORITE PAGE ............125 distance (track) ............77 features ................
  • Page 165 Mounting ..............133 Keys ................16 mounting ..............136 Kilometer ..............161 mounting hole ............135 Kilometer Per Hour ............ 161 Move ................16 Km ................161 MOVING A MARK ............61 CPN700i and CPN1010i Multimedia Chart Plotters Page 167...
  • Page 166 moving cursor .............. 16 Page Soft Keys ............31 MPH ................161 PAGE SWEEP ............. 36 Mt ................161 Page Sweeping ............16 MTW ............103, 148, 150 Pages Selection ........... 29, 31 Multi-language capability ..........41 Pair ..............33, 101 Multimedia icon ..........
  • Page 167 ............10 SELECTING A ITEM ........... 18 TEMP ................85 Selecting Language ............ 34 Temperature ..............36 SEND ..............63, 68 temperature ............148, 149 Send ................63 TERMS ..............160 CPN700i and CPN1010i Multimedia Chart Plotters Page 169...
  • Page 168 TEST ................154 Universal Time Coordinates ........31 THICKNESS ..............68 update the charts ............38 thumb ................. 131 USB ............. 10, 23, 145 TIDE ................96 USB memory stick ............. 137 Tide ............45, 82, 96, 99 USB thumb drive ............131 tide ................
  • Page 169 XTE Alarm ..............103 WMA ................128 WPA ................162 ZOOM 200kHz ............. 96 WPA-Personal ............162 ZOOM 50kHz ............... 96 WPA-PSK ..............114 ZOOM Keys ..............14 WPA2 ................ 162 zooming ............... 20 CPN700i and CPN1010i Multimedia Chart Plotters Page 171...
  • Page 170 PLEASE NOTE United States: To receive warranty service, the purchaser must deliver the Product, transportation and Insurance prepaid, to STANDARD HORIZON (Marine Division of Vertex Standard) - Attention Factory Service - 6125 Phyllis Drive - Cypress, CA 90630, include proof of purchase indicating model, serial number and date of purchase.
  • Page 171 CPN700i and CPN1010i Multimedia Chart Plotters Page 173...
  • Page 172 Page 174 Owner’s Manual...

This manual is also suitable for:

Cpn1010i

Table of Contents