Page 2
ILUMINARC has no obligation to make, and does not commit to make, any such revisions. Document Revision The Colorist Pod 1Qa User Manual Rev. 1 is the first edition of this manual. Go to http://www.Iluminarc.com/ for the latest version.
Dimmer ................................12 Color ................................12 Whites Setting ..............................12 Reset to Factory Settings ..........................12 Ilumicode Menu Options ........................13 RDM Menu Options ..........................13 DMX Values ............................14 DMX Values (Cont.) ..........................15 Colorist Pod 1Qa User Manual Rev. 1...
Page 4
Photometrics ............................17 LED Disclaimer ............................18 LED Life ................................. 18 LED Binning ..............................18 Color Rendering Index (CRI) .......................... 18 Return Procedure ..........................19 Contact Us ..........................19 6. Technical Specifications ....................20 Colorist Pod 1Qa User Manual Rev. 1...
Useful damage report and any related claims to the carrier, not ILUMINARC. The customer must information. submit the report upon receipt of the damaged merchandise. Failure to do so in a timely manner may invalidate the customer’s claim with the carrier.
VOID and any repair cost being the operate this product outside these temperatures. sole responsibility of the · In case of a serious operating problem, stop using this product immediately! buyer. Colorist Pod 1Qa User Manual Rev. 1...
Product Description 2. Product Description The Colorist Pod 1Qa is an LED wash light intended to light a variety of both indoor and outdoor applications. The product consists of a cast aluminum body containing a power supply, control unit, and an adjustable bracket. The DMX input and output is located on the rear of the product.
Product Description Product Overview RGBA Quad-color LED Mounting Bracket Front View GORE Valve Power In In/Out Safety Loop Rear View Colorist Pod 1Qa User Manual Rev. 1...
Product Description Product Dimensions 6.85 in 174 mm 2.98 in 76 mm 6.43 in 163 mm Side View 16.93 in 430 mm 2.86 in 73 mm Rear View Spike View Colorist Pod 1Qa User Manual Rev. 1...
Procedure The Colorist Pod 1Qa comes with a mounting bracket with a single M12 hole. Connect clamps for truss mounting, attach the included stake to mount in the ground or mount directly to any flat surface.
Power Consumption 1Qa to a rheostat (variable resistor) or To determine the power requirements for the Colorist Pod 1Qa, refer to the label affixed to the dimmer circuit, even if the side of the product. You may also refer to the Technical Specifications.
1Qa must be linked using DMX You may link the Colorist Pod 1Qa to a DMX controller using a standard DMX serial cable in a daisy connection. If using other DMX products compatible with the Colorist Pod 1Qa, you can chain (serial) fashion.
Installation DMX Personality If you have not The Colorist Pod 1Qa uses the standard DMX data connection for its 5 DMX personalities as configured the DMX starting per the table below. Refer to the Introduction chapter for a brief description of these address and personalities.
Ilumicode addresser/RDM2go DMX addresses to each product, you The Colorist Pod 1Qa uses the Ilumicode addresser (Ilumicode) or an RDM2go for configuration must connect the Ilumicode to each product, purposes. The diagram below shows how to connect the Ilumicode/RDM2go to this product. This individually or use an connection will control multiple products at the same time.
<POWER> automatically after 30 seconds of inactivity. Control Options You can set the Colorist Pod 1Qa start address in the 001–512 DMX range. This allows for the control of up to 52 products in the 10-channel 10ch personality. DMX Programming Carry out all the programming procedures indicated below from the control panel.
5. Repeat steps 3 and 4 for the other RGB colors to obtain a white color. 6. Repeat steps 2 through 5 for the other white colors. Reset to Factory Settings 1. Go to SETTINGS > RESET. 2. Select an option (YES/NO). Colorist Pod 1Qa User Manual Rev. 1...
Dimmer 0–100% 000 ó 255 0–100% 000 ó 255 Green 0–100% 000 ó 255 Blue 0–100% 000 ó 255 0–100% Amber 000 ó 010 No function Strobe 011 ó 255 Slow to fast Colorist Pod 1Qa User Manual Rev. 1...
0–100% Channel Function Value Percent/Setting 000 ó 255 0–100% 000 ó 255 0–100% Green 000 ó 255 Blue 0–100% 000 ó 255 Amber 0–100% Channel Function Value Percent/Setting 000 ó 255 Dimmer 0–100% Colorist Pod 1Qa User Manual Rev. 1...
7. Gently polish the external glass surfaces until they are free of haze and lint. Product Repairs ILUMINARC strongly advises you against attempting any repairs to this product unless you are an authorized ILUMINARC technician. Colorist Pod 1Qa User Manual Rev. 1...
LED Disclaimer LED Life ILUMINARC rates LED lifetime based on lumen depreciation of 70% of the original output, with data provided by the manufacturer of the LED. Data from the manufacturer of the LED are not independently verified or measured by ILUMINARC. When the product is operating in optimal environmental conditions, the LED lifetime is rated to be 50,000 to 70,000 hours by the LED manufacturer.
The user must clearly label the package with an RMA #. ILUMINARC will refuse any product product(s). returned without an RMA #. DO NOT write the RMA # directly on the box. Instead, write it on a properly affixed label.
Cooling System 110 °F (43 °C) Convection I/O Connectors Connector Type Channel Range Proprietary IP65 3-pin IP65 4, 6, 10, 48 or 53 Product Name Item Code UPC Code Ordering Colorist Pod 1Qa Colorist Pod 1Qa User Manual Rev. 1...
Need help?
Do you have a question about the Colorist Pod 1Qa and is the answer not in the manual?
Questions and answers