Mounting On A Wall - LG MT46 Series Owner's Manual

14
ASSEMBLING AND PREPARING
Adjusting the angle of the TV to suit view
Image shown may differ from your TV.
y
Tilt from +20 to -5 degrees up or down to
adjust the angle of the TV to suit your view.
-5 +20
Front
CAUTION
When you adjust the angle, do not hold
y
the bottom of the TV frame as shown on
the following illustration, as may injure
your fingers.

Mounting on a wall

For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting
Bracket Installation and Setup Guide.
Rear
If you intend to mount the TV to a wall, attach
Wall mounting interface (optional parts) to the
back of the TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it
will not drop.
10 cm
1 Please, Use the screw and wall mount
interface in accordance with VESA
Standards.
2 If you use screw longer than standard, the
TV might be damaged internally.
3 If you use improper screw, the product
might be damaged and drop from mounted
position. In this case, LG Electronics is not
responsible for it.
4 VESA compatible only with respect to
screw mounting interface dimensions and
mounting screw specifications.
5 Please use VESA standard as below.
784.8 mm and under
y
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm and above
y
* Please use VESA standard wall mount pad
and screws.
10 cm
10 cm
10 cm