Advertisement
UNINET IMAGING INC. • MINOLTA
SEPARATING THE DRUM UNIT
5. The drum unit (top) and developer unit (bottom) are joined
together.
7. After removing he gears, release the two screws that hold the
drum axle plate in place.
Release the compression spring that is connected to the devel-
oper unit beneath.
Slide the drum axle plate out.
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
®
MAGICOLOR 5430 CARTRIDGE REMANUFACTURING INSTRUCTIONS
w w w.
u n i n e t
6. Locate the gear train side of the drum unit.
Remove the OPC contact (highlighted).
Now remove the gear train directly behind it. Note the position-
ing of the gears. One of the gears is not removable.
8. Drum axle plate removed.
i m a g i n g . c o m / t e c h n i c a l . a s p
Advertisement
