Before starting Please contact Unilever Food Solutions for background information and product related questions. Local contact details at the back of this manual. 1.1 Important safety notes Read the operating instructions carefully before use. In addition to these operating instructions, it may be necessary to carry out local risk assessments, and actions according to national or regional regulations.
NOTE Unilever Food Solutions and Spengler GmbH & Co. KG can not be held liable for damage to property or injury to persons caused by failing to strictly comply with safety regulations and instructions or by negligence when transporting, installing, starting, maintaining and repairing the Tea Fusion machine and its accessories.
1.4 User groups User – A person, which uses the Tea Fusion machine to prepare drinks for end customers or the end custumers themselves (Self-Service). Operator – Trained staff familiar with cleaning of the Tea Fusion machine. Service technician – Trained specialist who knows the dangers of the Tea Fusion machine and is familiar with the machine's technology.
Use by persons who are not instructed and not suffi ciently qualifi ed. ► Use of products for which the best-before date has already expired. ► Use of products not approved by Unilever Food Solutions. ► Use of spare parts not approved by Spengler GmbH & Co.KG. ►...
(see also chapter 12 on page 54). Initial Installation/ Reinstallation NOTE Setup and commissioning of the Tea Fusion machine must only be performed by a service technician! Before setup and commissioning of the Tea Fusion machine, you must have read the present operating instructions completely! Check whether the machine has any transport damage and/or concealed damage upon delivery.
Page 9
Connect Tea Fusion machine to a grounded socket with the earthed mains plug. The socket must be accessible for the voltage supply to be easily interruptible. Do not connect Tea Fusion machine to a mains supply where high loads when switching on other machines may cause voltage fl uctuations.
Page 10
At the end of preparation of the drink, the used tea capsule is automatically taken to the waste bin. After the Tea Fusion machine has been set up and commissioned, it must be subjected to a fi nal inspection again.
fi nished the two product selection buttons light ready for the next brew. NOTE If the waste bin is drawn out of the Tea Fusion machine during preparation of a beverage, the Tea Fusion machine stops at once and the warning light starts to fl...
6.1 Safety provisions for cleaning and maintenance Before performing any work on the Tea Fusion machine, observe the following safety notes: DANGER Electrical power! Danger to life from electrical shock.
Observe the application and safety notes of the manufacturer! 6.4 Cleaning NOTE Only take the Tea Fusion machine into operation again after cleaning when all parts have been installed again properly and the safety covers are installed correctly! 6.4.1 Cleaning intervals and general cleaning work...
Page 14
(no micro fi bre and paper tissues) Brewing head + fi lter Brewing cylinder Capsule ring Remove and soak in destaining solution Capsule opener Drawer bottom cover Page 14 Version 2.0 User Manual Tea Fusion Machine 09/2013...
5 seconds and then starts to fl ash (capsule counter is reset to 0). Empty the waste bin, clean it under running water and dry it off thoroughly. Insert the waste bin into the waste bin unit again and return the waste bin into the Tea Fusion machine. The waste bin icon goes out.
Page 16
WARNING Hot surfaces inside the Tea Fusion machine! Danger of scalding. Let the machine cool off before performing cleaning and maintenance work. Fig. 6: Remove the brewing cylinder The brew cylinder should be soaked in a suitable de-staining solution to remove tea stains. A soft non abrasive cloth may be used to aid stain removal (for further information, please refer to chap.
6.4.5 Clean the drawer assembly Pull out the product drawer (item A) to the stop. Pull out drawer bottom cover (item B) to the front. Fig. 8: Remove drawer bottom cover 09/2013 User Manual Tea Fusion Machine Version 2.0 Page 17...
Page 18
Use a clean moistened cloth to wipe around the drawer area. Reassemble the product drawer again in reverse order. WARNING Crushing injury of the hands! Crushing of hands while assembling/disassembling parts. Carefully assemble/disassemble parts. Page 18 Version 2.0 User Manual Tea Fusion Machine 09/2013...
NOTE Aluminium Parts! The cleaning solution must not be used on the brushed Aluminium drip tray parts, as this may discolour, and damage the surface. 09/2013 User Manual Tea Fusion Machine Version 2.0 Page 19...
The machine may only be installed and serviced by a service technician. Service intervals are subject to local conditions and frequency of use. Please contact your machine service provider for details on the required servicing of your Tea Fusion machine. Indicator lights...
10% - 80% - Humidity Rated voltage 220-250V~/50HZ ±15% 1LNPE Europe Rated output 3 kW Fuse 13A (external) Technical changes reserved No liability is accepted for mistakes and print errors. 09/2013 User Manual Tea Fusion Machine Version 2.0 Page 21...
Final disposal. NOTE If the Tea Fusion machine is to be set up again at a different site, decommisioning must be well prepared. All construction and attachment parts must be carefully disassembled, marked and, if required, packed for transport. This warrants that all parts are correctly assigned again and can be installed properly.
Service Partner `Tea Fusion by Lipton’ is a brand by Unilever Food Solutions. For questions about Tea Fusion by Lipton, please visit: www.teafusionbylipton.com Unilever Food Solutions UK Unilever UK Limited. Leatherhead, Surrey KT22 7GR United Kingdom Please contact your local Machine Service Partner for specifi c machine related questions, service and maintenance.