Page 2
ATA-01/02/01P/0101 1 Introduction............................2 1.1 Hardware Overview.........................2 1.2 Software Overview........................2 2 Keypad Interface for The ATA......................3 3 Setup the ATA by Web Browser (LAN connection)................5 3.1 Login............................5 3.2 System Information for the ATA....................7 3.3 Phone Book..........................7 3.4 Phone Setting..........................8 3.5 Hot line..........................18 3.6 Alarm setting.........................19...
Page 3
ATA-01/02/01P/0101 Introduction This user`s manual is for 1-port FXS(ATA-01/01P/0101)/2-port FXS (ATA-02) and 1-port FXO ( only supported in ATA-0101) VoIP terminal adapter (ATA). This user`s manual will explain the IVR instruction, and command line configuration for the ATA. Before using the ATA, some setup processes are required to make the ATA work properly.
Page 12
ATA-01/02/01P/0101 Figure 6.DND Setting 3.4.6 Auto Answer (For 0101 only) -1- You can choose to disable or enable Auto Answer feature. -2- Auto Answer Counter: Specifies how many ring tones will be heard before it is switched to IP or PSTN line (depending on the type of incoming call). Default value is 3, you can set between 0-8.
Need help?
Do you have a question about the ATA-01 and is the answer not in the manual?
Questions and answers