Advertisement
Functions
1. Your glue gun is equipped with a special PTC system for the optimum control of temperature.
2. A specially designed system prevents the glue from stopping in the outlet duct.
3. Your glue gun accepts 1/2" dia. glue sticks and can deliver up to 60 cm glue each time the trigger is pres-
sed.
4. Tool nose operates at opening pressure to assure the optimum control of glue flow.
5. The gun comes complete with stander for the correct and safe positioning of the tool on the work place.
Hints for use
1. Standard work time for hot glue is about 30 seconds. Keep jounted parts pressed for 15 to 20 seconds.
After 1 minute, the junction has attained 90% of bond strength.
2. Work time increases to 50 - 60 seconds if the glue has been dispensed in the form of large drop and dimi-
nishes if in thin lines.
3. Large surfaces are difficult to bond as glue tends to solidify before being spread on the entire surface.
4. Pre-heating of surfaces to bond and exposing them to sun light greatly enhance the adhesive strength.
Thismethod is highly rexommended when joining metal parts.
5. Hot glue can be advantageously used instead of nails, fasteners or liquid adhesives. Do not use glue to
bond load bearing parts.
6. Hot glue starts melting at approx. 140 F. Do not use on heat sensitive materials.
Suggestions
1. Glue can be used to bond the following materials: wood, plastics, foamed plastics, textiles, cardboard, tiles,
ceramic, etc...
2. Can be also advantageously employed to close holes or insulate parts exposed to atmospheric agents.
3. Quick-acting and reliable, the glue can be also used to repair carpets, bookbinding, soles and for a number
of other jobs.
4. Glue can be used to insulate electric parts. Waterproof and resistant to many other liquids.
5. Fast, exologic and energy saving, your glue gun makes any job easier and faster.
Warning!
If the supply cord is damaged, it must be replaced by a manufacturer's service agent or a similar qualified
person, because special tool is required. Should defects in material or workmanship be found, please re-
turn the tool to your vendor (with the purchase bill). The tool will be replaced immediately.
2
E301471#1
Advertisement
