On version with LED tail lights, the
position of the retaining lugs is
slightly different.
6. Remove and replace the bulb:
Tail light (1)
Rear fog light (2) (left side)
Reverse light (2) (right side)
On version with LED tail lights
only reverse light bulb (1) (right
side) or rear fog light bulb (1) (left
side) can be removed and
replaced.
7. Insert the bulb carrier into the tail
light assembly. Attach plug to the
light assembly. Fit light assembly
on the tailgate and tighten the
screw from the inside. Attach
cover.
Depending on the version, tail lights
are designed as LEDs. In case of
failure, have LEDs replaced by a
workshop.
Vehicle care
Side turn signal lights
To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and
remove with its right end.
209