Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Hi-Tech 22-229
- Page 1 ES T . 1984 HI TECH 4" Trim Saw INSTRUCTION MANUAL...
-
Page 2: Safety Instructions
For your own safety be sure to read, understand and follow all warnings, safety rules and instructions in this instruction manual before using this machine. Failure to do so can result in serious personal injury. This instruction manual is intended for the following machine models: 22-229 and 22-225. Save these instructions SETUP •... - Page 3 SAFETY INSTRUCTIONS • Allow your trim saw to cool. By ignoring this are not safety glasses. If anyone is around the machine while it’s in use, they must also wear warning, the 4" Trim saw can overheat and deform safety glasses. the saw housing.
-
Page 4: Table Of Contents
SAW BLADE ADJUSTMENTS ACCESSORIES FAQS TROUBLESHOOTING REGISTER YOUR PRODUCT Register your Hi-Tech Diamond 4" Trim saw at hitechdiamond.com/register to receive future product information, special offers and to facilitate warranty related requests. You can also register your 4" Trim saw by completing and mailing us the enclosed registration form. -
Page 5: Warranty Service
ONE-YEAR LIMITED WARRANTY Reentel International Inc. stands behind the quality of its Hi-Tech Diamond machines. That’s why they’re warranted to be free from defect for one full year from the date of purchase. Registering your product helps facilitate warranty requests. -
Page 6: Machine Details
MACHINE DETAILS This image shows parts and accessories included with your 4" Trim saw machine. 4" Trim saw base unit (1/4 hp variable speed motor) On/off power switch Trim saw blade guard Trim saw table 4" thin notched diamond saw blade (included with instruction manual) 3/32"... -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Carefully unpack the trim saw from the box and remove all loose foam and accessories. Set the packaging aside should you need it in the future. Check to make sure all parts are present on both the machine and in the instruction Aluminum arbor manual. - Page 8 OPERATING INSTRUCTIONS Replace the saw table, making sure all four Put on safety goggles (not included), then tapered pins are secured. Insert the black turn on the machine by turning the power spray shield (part #7) into the slot located at the knob clockwise.
-
Page 9: Cutting Tips
CUTTING TIPS Before you make the first cut, line up your Some saw blades are sintered, continuous rock or glass properly with the saw blade. rim blades that may require a “dressing”. Lightly slide the material into the saw blade This means that the diamonds embedded into until a groove forms, then push the material the sintered matrix of the saw blade are wearing... -
Page 10: Maintenance
MAINTENANCE OILING CLEANING The only parts you need to oil on the trim saw After each use, drain the water reservoir. Any used machine is the inside of the aluminum arbor and water must not be disposed down a sink, as rock the motor shaft (Fig. -
Page 11: Saw Blade Adjustments
SAW BLADE ADJUSTMENTS BLADE POSITIONING & CLEARANCE ADJUSTMENTS Follow these four steps to adjust the position of the saw arbor and saw blade so that the blade does not make contact with the saw table. Carefully remove the saw table and loosen the two set screws located in the saw arbor using the Allen wrench, turning counter-clockwise (Fig. -
Page 12: Accessories
ACCESSORIES The saw blades featured on this page are compatible with the Hi-Tech Diamond 4" and 5" trim saw machines. For a listing of all Hi-Tech Diamond products, visit hitechdiamond.com. Thin notched diamond saw blades Thin sintered diamond saw blades... - Page 13 ACCESSORIES The saw blades featured on this page are compatible with the Hi-Tech Diamond 4" and 5" trim saw machines. For a listing of all Hi-Tech Diamond products, visit hitechdiamond.com. Super Slicer electroplated diamond saw blades Our Super Slicer electroplated diamond saw blades are designed to cut twice as fast compared to other blades.
-
Page 14: Faqs
FAQS What lubricants can I use with this What size saw blades can I use on this trim saw? trim saw? This trim saw machine is designed to be You can use either 4" or 5" diameter saw blades operated with oil or water. We recommend on this trim saw machine. -
Page 15: Troubleshooting
This is a result from not oiling the inside of the arbor according to the oiling instructions on page 10. If it impossible to remove, please contact Hi-Tech Diamond at 1 (630) 596-9909 and one of our specialized technicians will help you over the phone for correct removal. - Page 16 EST. 1984 HI TECH MANUFACTURED BY Reentel International Inc. 808 Burr Oak Drive Westmont, IL 60559 U.S.A. PHONE 1 (630) 596-9909 EMAIL sales@hitechdiamond.com WEBSITE hitechdiamond.com FACEBOOK facebook.com/hitechdiamond TWITTER twitter.com/hitechdiamond Rev 01/01/16...