Changing Privacy Settings; Resetting The Advertising Identifier; Limiting Ad Tracking - Insignia NS-40DR420NA16 User Manual

NS-40DR420NA16/NS-48DR420NA16
• Color—Adjusts the intensity of colors in the picture. A setting of 0 removes all color and displays a black and white
picture.
• Tint—Adjusts the color balance from green to red to obtain accurate colors in the picture.
• Color temperature—Adjusts the overall colors in the picture from Normal to slightly more bluish (Cool) to slightly
more reddish (Warm).
• Picture size—Adjusts the aspect ratio of the picture, enabling you to view a picture in its original format, or zoom or
stretch it to fill the screen. The Auto setting has been found to produce the best picture in most cases.
• Game mode—Controls whether Game mode is on or off. When On, your TV performs less image processing and has
less input lag. When Off, your TV may perform more image processing and has more input lag, which is less desirable
for action games. Available only for HDMI and AV inputs.
• Reset picture settings—Returns all picture settings for the input's currently-selected Picture mode to their original
values.
Tip
To dismiss the Advanced picture settings menu, just wait a few seconds without
pressing any buttons. Or press

Changing privacy settings

By default, when connected to the Internet and activated with your Roku account, the TV uses an advertising identifier
to track your usage behavior. You can change the privacy settings on your TV in two ways: resetting the advertising
identifier and limiting ad tracking.
Note
Privacy settings are not present on TVs operating in non-connected mode.
Non-connected TVs do not display advertisements.

Resetting the advertising identifier

Resetting the advertising identifier has the effect of clearing your prior usage history and starting over. From that point
forward, your new usage patterns affect the advertisements you see on your TV.
To reset the advertising identifier:
1 From the Home screen menu, navigate to Settings > System > Privacy.
2 Highlight Reset advertising identifier. Press
reading the information, press OK to close the More Information window.
3 Press OK to reset the advertising identifier, and then press OK again to dismiss the verification message.

Limiting ad tracking

You can limit Roku's tracking of your usage behavior by limiting ad tracking. When you do, your TV will display ads that
are not personalized based on your TV's advertising identifier.
To limit ad tracking:
1 From the Home screen menu, navigate to Settings > System > Privacy.
2 Highlight Limit ad tracking. Press
information, press OK to close the More Information window.
3 Press OK to select the Limit ad tracking option.
Note
If you perform a factory reset and then reconnect your TV, ad tracking is restored
until you repeat these steps.
again to dismiss the menu immediately.
to view more information about this option. When you finishing
to view more information about this option. When you finish reading the
www.insigniaproducts.com 53