Download
Share
Print this page
  1. Manuals
  2. Brands
  3. InMotion Manuals
  4. DVR
  5. inDVR700RT TVI
  6. User manual

InMotion inDVR700RT TVI User Manual

(full hd)hybrid dvr
Hide thumbs

Advertisement

Quick Links

Download this manual
inDVR700RT TVI
(FULL HD)Hybrid DVR

Advertisement

loading
Need help?

Need help?

Do you have a question about the inDVR700RT TVI and is the answer not in the manual?

Questions and answers

Related Manuals for InMotion inDVR700RT TVI

Summary of Contents for InMotion inDVR700RT TVI

  • Page 1 TVI (FULL HD)Hybrid DVR...
  • Page 2 In case any solid or liquid get inside the machine’s case, please turn off the device immediately...
  • Page 13 here and refer to the concrete setup steps from the corresponding chapters. If users don’t Note: Press and hold ESC/Exit/FN key to switch the resolution of the VGA/HDMI output. Key points to check in case the remote doesn’t work. ’...
  • Page 14 —...
  • Page 15 “ ” “ ” “ ” “ ” “ ” “ ” “ ” “ ” “ ” “ ” “ ” is 0. It’s not necessary to reset the device...
  • Page 18 “ ” “ ” “ ” “ ”...
  • Page 19 “ ”...
  • Page 20 “admin” “123456”...
  • Page 21 “ ” “All” checkbox. Click “Apply” to save the setting.
  • Page 22 Click “Setting” button for a particular camera/channel to see a window a “OK” button to save the setting.
  • Page 23 Click “Apply” to save the setting. If there is something you don’t want to display in the live image. Yo “ ” button to go “ ”...
  • Page 24 “ ” Then click “Apply” button to save the setting. Check “enable”. Drag the mouse to set the ROI area. You may set 3 ROI areas at most.
  • Page 25 IP Camera tab. Click “Search” button to search the devices Click “Refresh” “ ” Note: If the network of IP cameras and HD TVI Hybrid DVR are in LAN, their IP address must be in the same network segment. For example: If the IP address of HD TVI Hybrid DVR is 192.168.1.2, the IP address of IP camera must be 192.168.1.XXX.
  • Page 26 “ ” “ ” “ ” “ ”...
  • Page 27 “ ” You need to check “Enable” Note: If the HD TVI Hybrid DVR and the IP cameras you want to add are in WAN, the IP address of the IP camera input here must be WAN IP. Enable “Mirror” and “Flip”. Click “Save”...
  • Page 28 “ ”...
  • Page 30 “ ” to select channel and click “Copy” button.
  • Page 31 Select a day and click “Add” button to schedule start time and end time. Then click Chapter 6.3 Schedule Recording Chapter 9.2 Motion Alarm “ ” “ ” “ ”...

  • Page 32: Chapter 6.3 Schedule Recording

    Chapter 6.3 Schedule Recording Note: The timelines of these two schedules (schedule for motion based recording and schedule for motion alarm) must match, otherwise you will not get the record in some time). Chapter 6.3 Schedule Recording “ ” “ ”...
  • Page 33 Chapter 6.3 Schedule Recording Note: The timelines of these two schedules (schedule for sensor based recording and schedule for sensor alarm) must match; otherwise you will not get the record in some time).
  • Page 34 “ ” “ ”...

  • Page 35: Chapter 8 Backup

    “ ” Chapter 8 Backup “ ” Click “Search” button to display the searched event information in the event list box.
  • Page 36 “ ” Use “All” button to lock/unlock or delete all files in the file management column. “ ” locked file and click “Lock” button to unlock this file Select an unlocked file and click “Delete” button to delete this file.

  • Page 37: Chapter 9.2 Motion Alarm

    “ ” Chapter 9.2 Motion Alarm “ ” “ ” Chapter 6.3 Schedule Recording “ ” “ ” “ ” Chapter 6.3 Schedule Recording...
  • Page 38 “ ” Press “Search” button to search for a recorded image.
  • Page 39 Set the start & end time, select channels and click “Search” button to display the Select a required file or checkmark “All” to select all data files. Click “ ”...
  • Page 40 “ ” Note: If the backup files are saved in DVR format, please check backup player. Only this player can play these files in DVR format. If the backup files are saved in AVI format, you can play these files with common media player. “...
  • Page 41 Click “Apply” button to save the setting. lick “Setting” button...
  • Page 42 Go to “T ” “ ” “ ” Schedule Recording...
  • Page 43 The setup steps of motion trigger are similar to “Alarm Handling” (See Sensor Note: Prior to setting motion detection field it is recommended that you click icon to clear the existing field and set afresh.
  • Page 44 elect “All” to set the same settings for all channels. Click “Apply” button to save the setting. Chapter 6.3 Schedule Recording The setup steps of video loss trigger are similar to “Alarm Handling” (See Sensor If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage Alarm”...
  • Page 45 Chapter 6.3 Schedule Recording Note: The alarm out and buzzer must be enabled in prior and their schedules must cover the schedule of other alarm types, like sensor/motion alarm, so that the triggered alarm out and buzzer can take effect on an alarm. “...
  • Page 46 Select “Enable” and set up the value of address, baud rate and protocol according to the Select “All” to set the same settings for all channels.
  • Page 47 In the Advanced interface, click preset “Setting” button to see a dialog box “Setting” button. Note: PTZ must support wiper and light button and these two buttons are just available when selecting PELCOP or PELCOD. “ ”...
  • Page 48 In the Advanced interface, click track “Setting” button to see a dialog box as click “Apply” to save the setting.
  • Page 49 “ ” If you want to configure your own settings, disable “Obtain an IP address automatically” disable “Obtain an IP address automatically” Test the effectiveness of the network by clicking “Test” button after you set up the If the network is well connected, please click “Apply” button to save the setting.
  • Page 50 Select “All” to set the Set sender’s address and password. Set receiver’s email address and click “Test” button to test the validity of the mailbox. In the server interface, select “Enable” as shown...
  • Page 51 Then click “Apply” button to save the setting. Now, the ECMS/NVMS system will www.autonat.com Click “Apply” to save the settings. manually in the network tab and then click “Other Settings” tab. Click “Register” to register the domain name. When the successful prompt pops up, it...
  • Page 52 “ ” “ ” Click “Test” button to test the effectiveness of the relevant information. Click “Apply” button to save the setting. Note: The domain name selected by user is a banding domain name of the HD TVI Hybrid DVR. User should logon the website provided by the server supplier to register a user name and password and then apply for a domain name online.
  • Page 53 “Registration” but “dvr ” at the DDNS Sever pull down list box and input user name and passwor Login IE browser and input registered domain name “http://www.xxx.dvrdydns.com”,...
  • Page 54 Note: After changing the language and video output, the device needs to login again.
  • Page 55 he date format, time format, time zone in this interface; checkmark “ NTP server” to refresh NTP server date. You can also adjust system date manually. Click “Apply” button to save the setting. Click “Apply” button to save the setting.
  • Page 56 . For example, if an admin user doesn’...
  • Page 57 “Binding PC MAC Address” and input this address. Note: When the default value of binding PC MAC Address is 0, the user is not bound with the specified computer. If the bind option is used, the user would be able to log into the HD TVI Hybrid DVR only through the specific computer (carrying the MAC address).
  • Page 58 Select the added user you want to delete and then click “Delete” button. Select the added user you want to modify and then click “Modify” button to do the “Change Password” button.
  • Page 59 “ ” “ ” “ ” Note: All recorded files in the hard disk will be lost after formatting.
  • Page 60 “ ” “ ” “ ” “ ” “ ” “ ” “ ” “ ”...
  • Page 61 www.autonat.com “ ” http://www.autonat.com Note: If you cannot download and install ActiveX, please refer to FAQ Q8. admin 123456...
  • Page 62 ’s Main Menu Notice: If HTTP port is not 80, add the port number after IP address. For example, set HTTP port as 82, input IP address like 192.168.1.2:82. Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
  • Page 63 “ ” Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. Right click safari icon and select “Show in Finder”.
  • Page 64 Go to Network interface and then click “Ethernet Connected” to check the internet ), and click “ ” shown. Click “Continue” “Install” button...
  • Page 65 hen click “OK” to install this Active X click Safari icon on the desktop and then select “Quit” button to quit the browser. Then...
  • Page 66 button to start recording. The record file will be saved in user’s PC. Note: Click Click “Snap”...
  • Page 68 Click “Search” button. The record data will be displayed in the data information list box. Click “Play” button to playback.
  • Page 69 Click “Search” button.
  • Page 70 Click “Search” button to search the recorded files. : Select certain file item in the file list box and then click “Lock” button t : Select a locked file and then click “Unlock” button to unlock this file. : Select an unlock file and then click “Delete” button to delete this file from file list. Select channels, set the start and end time and then click “search’...
  • Page 71 Click on the tool’s tab to access the Disk Management tool. Here you can view the status of...
  • Page 72 Q5. Why can’t I find the HDD? b. Maybe the user hasn’t enabled the record function or has done incorrect...
  • Page 73 Custom Level….Refer to Fig 8 Enable all the sub options under “ActiveX controls and plug ins”. Refer to Fig 8 “ ” displays “please wait…”all the time. Why and How can I do?
  • Page 75 After you install it, open this player and click “Open Path” button to open your backup...
  • Page 77 —...