Do you have a question about the F8 Mirror and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for 1001Espions F8 Mirror
Page 1
| 1 Mirror the world's first high-definition high-definition home security camera clock F8 HD video mirror clock F8 operating instructions First, Thank you for choose our products! Before use, please read this manual carefully. In order to better service, the contents of this manual may be with the product performance and functionality is changed, will be without notice.
Page 2
| 2 Video light (K6) infrared remote control receiver (K7) microphone ( K8) USB interface (K9) TF (slot) (K10) battery compartment (K11) Battery cover (K12) cells (K13) Introduction This is the first product with U disk storage. High-definition digital video motion detection. Camera. A separate recording.
Page 3
| 3 Key instructions: K4 key is used to reset the machine when the encounter did not respond, press the reset button K4. K1 key: used to switch machines, a separate recording. K2 key: used to take pictures. Camera.
Page 4
| 4 K3, 4 flashing red and blue under the same dual-lamp off after they enter the motion detection camera in standby mode, the object moves in front of the blue light flashed into the mobile detection camera, and then press K3 key, and stop motion detection recording is automatically saved and enters the standby state.
Page 5
| 5 12, (video) in the standby mode, click the red light flashes three times and exterminate into the video button in the point , stop and save 13, (Motion) in the standby mode, click the red and blue...
Page 6
| 6 use. Can not boot: batteries are charged, please charge; by K4 key, turn the power off, reboot. Not associated computer: Make sure your operating system, drivers, USB interface cable is the things normal. No disk space capacity, TF card is plugged or damaged.
Page 7
| 7 can be replaced General Troubleshooting Not boot Battery charging, the battery is bad restart Blue lights Reminder plug TF card flash exterminate Reminder plug Aligned receiver, unplug the remote TF card control insulation film, replace the remote control batteries...
Page 8
| 8 shooting illumination: a well-lit environments, do not please the camera directly at the sun and other strong light source, to avoid optical devices suffer injury. Cleaning requirements: Do not dust density is too large to use the environment to prevent dust contamination of lenses and other components, affect the camera effects, camera with lens cleaning paper or cloth to wipe glasses to keep clean.
Page 9
| 9 F8 mirror Voice bell operating instructions Product Overview This product is through convenient voice control and button operation, the mirror can display time, date, automatically shut down for 6 seconds, and there are three groups set alarm clock for, you can set off a long voice is a long section was innovative design features and practical environmentally friendly products.
Page 10
| 10 DISPLAY SETTING TIME IS SHOWN BY VOICE CONTROL To enter to voice control mode, press and hold the „DOWN‟ key for 2 seconds, one „Bi‟ sound is occurred. At the normal time display state, LCD is hidden on the mirror.
Page 11
| 11 At the state of time, press „TIME‟ key or push the clock backward shown the date display. At the state of normal date display, press and hold „TIME‟ key for 3 seconds to enter setting mode. „Year‟ display is blinking, press „UP‟ or „DOWN‟ to set the year.
Page 12
| 12 ONE „Bi‟ is occurred to switch OFF the snooze function. Press and hold „UP‟ key for 3seconds to switch OFF the snooze function. TWO „Bi‟ is occurred. When it reaches the snooze function, it will sound the alarm music every 5 minutes for 3times at most without any press.
Need help?
Do you have a question about the F8 Mirror and is the answer not in the manual?
Questions and answers