Ness 100-290 Installation & Operation

www.ness.com.au
NESS RADIO REPEATER
Installation & OPERATION NOTES
Document Part Number 890-234
For the products:
100-290 Ness Radio Repeater 304MHz
101-447 Ness Radio Repeater 868MHz
Ness Corporation manufacturing processes are accredited to ISO9001 quality standards and all possible care and
diligence has been applied during manufacture to ensure the reliable operation of this product. However there are various
external factors that may impede or restrict the operation of this product in accordance with the product's specification.
These factors include, but are not limited to:
1. Erratic or reduced radio range. Ness radio products are sophisticated low power devices, however the presence
of in-band radio signals, high power transmissions or interference caused by electrical appliances such as wireless
routers, cordless phones, computers, TVs and other electronic devices may reduce the range performance. While such
occurrences are unusual, they are possible. In this case it may be necessary to either increase the physical separation
between the Ness receiver and other devices or if possible change the radio frequency or channel of the other devices.
2. Unauthorised tampering, physical damage, electrical interruptions such as mains failure, electrical spikes or lightning.
COPYRIgHT NOTICE
All rights reserved. No part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ness.
Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of
ongoing product development and improvement.
© 2011 Ness Corporation Pty Ltd ABN 28 069 984 372
Rev3.1
InstallatIon & operatIon
Ness Radio Repeater
Rev3.1