Download Print this page

Opale-Parmodels Trike XL User Manual

Advertisement

Quick Links

2015
User's manual
v1.0
Trike XL
Thanks for reading this manual before first use.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387

Advertisement

loading
Need help?

Need help?

Do you have a question about the Trike XL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Opale-Parmodels Trike XL

  • Page 1 2015 User’s manual v1.0 Trike XL Thanks for reading this manual before first use. O p a l e - P a r a m o d e l s . c o m Opale Aero System SARL - 23 rue de la Motte 62250 MARQUISE - France contact@opale-paramodels.com +33(0)981 144 387...
  • Page 2 Thanks for having chosen an Opale-Parmodels product. We truly believe this remote-controlled paraglider is Backpack composition going to give you hours of enjoyment and will enable you to go through new outstanding piloting experiences. This user’s guide content includes all the information you need to get your wing in flight and to ensure you will take good care of it.
  • Page 3 Mount the front wheel with the help of the axis and Assembly the spacers included. Battery holder installation on the central girder. Use 4xCHC M4-50 + 4xM4 nut-lockings. By the mean of a cutter, remove the painting that is in the surface of the trike.
  • Page 4 Mount the strap containing inox ring by mean of a Position the two side bars on the axis and fix them by CHC M3-10, a ring and a nut-locking. Then, fix the mean of 2x CHC M3-20 and nut-lockings. arm on the rudder bar of the servomotor by mean of 2x CHC M3-8 .
  • Page 5 Connect the motor to the controller. Servos and brakes settings Use the two brake bridle. Pass the first before the fixa- tion screw of the side bar, as indicated on the picture, by performing a head of lark. Position the inox buckles on the side bars. Inox buckles position is determined according to the position of the center of gravity.
  • Page 6 If using the mixer for RC paramodels (ref OP16782) F.A.Q. Questions / Answers ,the rudder bars must be in high position while the depth stick is in neutral position. My RC paramotor seems not to move forward very fast. How to remedy this problem?’ If your model advance a little bit, or if it even stays on-the-spot, it is because your model is too light.
  • Page 7 F.A.Q. Questions / Réponses Is it possible for the RC paramotor wing to take away some material for shooting/FPV? Until which mass? Each wing has a maximal takeaway capacity. Check the model total weight and compare it with the wing’s take- away capacity.