Page 2
1. Connect the black wire to Ground. 2. Connect the red wire to a 12V Switched Ignition Source. 3. Connect the RCA/Aux Output of the AIRSTREAM12V to the RCA/Aux input of the car stereo. Note that both RCA and Aux Outputs can be used at the same time.
Page 3
Bluetooth Pairing In order to stream music wirelessly, you must first pair your Bluetooth enabled device with the AIRSTREAM12V. 1. Enable Bluetooth on the device you wish to pair. 2. Search for Bluetooth devices and select ‘Connects2’. 3. The Bluetooth/Aux Status LED will flash blue and then remain illuminated when pairing is complete.
Page 4
Technical Support Should you experience any issue please contact Connects2: Email: technical@connects2.com Online: support.connects2.com Notes ............................................................................................................................................................................................................................................................................................................................................................................................................www.connects2.com...
Need help?
Do you have a question about the 12V and is the answer not in the manual?
Questions and answers